Hello everyone - some of the blue lights on my Amel 54 24V switch panel have blown. These are just to illuminate the switches at night. Unlike  the red lights indicating a circuit is switched on

I have a suggestion: place it in the for sale section here… http://www.ybw.com/forums/forumdisplay.php?13-Practical-Boat-Owner-s-Reader-to-Reader Large forum of UK based raggies and wave makers

Our Geonav (on supermaramu 2000) does not work anymore. We hate putting things in bins, does anyone need spares? The Geonav can be collected in London. But if someone just needs navionics charts for

Is there anyone with a ZF30M gearbox who happens to know if there are bolt holes to mount a shaft alternator bracket like those present on the ZF25M (Hurth 250)? The Yanmar 75hp can be bought standard

Ullar, We have an older Amel also, a 1979 Maramu. We fitted a Harken Big Boat track to our boat. The original Goiot track was substantial enough that we could drill and tap mounting holes for the

Hello everybody, My wife Ellen and I are fresh owners of an old Amel. We bought our Euros 41 no 250 last summer and sailed it for a couple of months on Baltic before wintering it on shore in Estonia.

Dennis, A load path sail is a crosscut laminate sail with reinforcing fibers laid along the load paths. The beauty of the construction is that the parts of the sail under more load have higher

During the survey of Libbey SM196 last year it was noted that there was moisture in both the foredeck lockers. We have finally got around to finding the source of the intrusion. Having emptied both

Dave, is there any optimum cloth weight I should go for in a load path Dacron material ? Thanks. Dennis [Non-text portions of this message have been removed]

I should have said Spurs B 1½ " Bill

Armin, BeBe, SM2k #387 has Spurs Rope cutter: B 1 Parts at http://spursmarine.com/shaft_parts.html Contact info is: Bryony Fisher Office Manager Spurs Marine Mfg., Inc. 201 SW 33rd Street Fort

I'm wondering if anyone has the dimensions of the interior curtains for a Super Maramu (Forward Cabin, Salon, and Aft Cabin). I want to make new ones but unfortunately neglected to take measurements

Hi Y'all, This week's super savings tip---I have just been quoted by Dessalator's UK agent £352 for a single SW30-2521 membrane for our D60. Air, Ice and Water in the US has a price of $189, (

Just call Spurs and tell them you have the same line cutter as Kimberlite, they keep track of what they sell by boat name. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi all, Is the setup on the SM different from the Sharki then?   On our Sharki sailplan there is a 'Trinquette secours', a heavy weather 11 sq mt sail made to be set from a strop at the spreaders

Hi all, at the moment I am not at the boat, but I need to know the size of the rope cutter on the SM2k, to order some spare parts shortly. Does anybody know and can give me the size or "Model Type"

Dennis, There's no "right answer" so to speak. Every material has advantages and disadvantages. Many Super Maramu owners in Europe favor Radial Hydranet from Dimension Polyant. It's important to note

Years ago, I did a hull up restoration of a Tartan-37. I replaced everything on the boat including every nut bolt and screw. The only thing that I did not replace were the hatch frames. They were

All of this talk about not putting a vertical load on the foredeck cleat prompts me to ask...On our Sharki I was planning to use soft shackles around the aft cleats as anchor points for the mizzen

Jose, Thank you Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Jose_Luis Sent: Sunday, February