Kent, Here is a photp of 13 GRP31 12v 110amp batteries in

One thing I've noted about our Outback inverter/charger is that the inverter is horribly inefficient. For small loads like a computer or recharging power tools, we simply use a portable inverter that

Does your Magnum inverter work independently of the charger?  ie if you are hooked up to 60 cycle shore power and run the microwave or A/C, are they getting 50Hz or 60 Hz

Thanks so much Paul.  So those 12 batteries are 120 A-H each in 6 pairs, right?   I would really appreciate a pic of the battery crib.  Please send to karkauai(at)yahoo(dot)com.   Thanks

Kent You are quite correct that my calculations are off. We have a total of 720 Amp Hrs in 12 lead acid batteries. Paul LaFrance To: amelyachtowners@... From: karkauai@... Date:

Kent The Magma charger is working great. Been in for 2.5 YRS. The only problem is when inverting is it drains the batteries quickly. ie: can only run the water maker for 1/2 hr before it shuts off due

Thanks, Richard.  I've been looking at all kinds of chargers and inverters.  It seems that it's hard to find an inverter that doesn't have a charger too.  There are plenty of inverters that have

Hi Kent I would suggest that you buy a Charles or charger that's a smart charger that can accept 9p to 260 V and 50 or 60 Hz this will allow you to charge the battery no matter where you. Second I

Hi, Paul, et al, I am looking to replace my old Heart Interface charger/inverter and am interested in the Magnum MS4124E. Your post below is very interesting and I'm thinking of doing something like

Hi Trevor, very happy to be of assistance, glad it went so well. Regards Danny SM299 Ocean Pearl To: amelyachtowners@... Sent: Thursday, 21 February 2013 2:41 PM Subject: [Amel]

Hi Danny, I simply can't thank you enough , your instructions were very clear and when followed the Yanmar engine walked out of there. I was very surprised how easy it was to move the

Amel can supply the little plastic plugs. Danny SM 299 Ocean pearl To: amelyachtowners@... Sent: Thursday, 21 February 2013 4:44 AM Subject: [Amel] The white filling in the genoa

I do not recall seeing a coupling, However, you might ask other owners with a yanmar to look at their engine as I am in NY and the boat is in SXM Fair Winds Eric Amel Super Maramu #376

Hi Eric, does the Yanmar instalation have a coupler like the Vetus (or any coupling) between the gearbox and the C drive? If so all I said would be pertinent as the Amel with the Yanmar has the angle

Hi Annsofie, We lost a few and just filled the gap with a white mastic. Can't tell the difference! Ian and Judy Pen Azen, SM 302, Ragusa

These are filled with white nylon caps available from Amel SAV. Pick the old pieces out using a pick and vacuum. Use clear RTV to secure the new ones. If I remember correctly there are slightly

Hi Is there any one who has replaced the white filling in the metal rail that the genoa cart is running on? Any tips on how to fix new filling is apreciated. Ann-Sofie S/Y Lady Annila SM #232 at

Danny, That serial number Amel Super Maramu #435 probably has a Yanmar engine as does mine. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Danny, That serial number Amel Super Maramu #376 Kimberlite probably has a Yanmar engine as does mine. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Sorry Trevor, I said "move the motor forward", I meant aft. Danny SM 299 To: "amelyachtowners@..." <amelyachtowners@...> Sent: Wednesday, 20 February 2013 8:23 PM Subject: Re: