I have made note of that Bob. will try to meet up. Regards Danny ________________________________ To: amelyachtowners@... Sent: Sunday, 16 June 2013 2:38 PM Subject: Re: [Amel] Wind

Hi Alexandre, If we go to weather in anything above 15 knots true, I use the staysail inside the shrouds. I don't partially furl the genoa going to windward, the shape is not good and the sheeting

Hello Alan,   I have a stay sail as well.  The previous owner was very knowledgeable, I need to call him back, I really like the way it was installed, therefore I have not quite yet master that

Danny I'll be on a Island Packet 48 called Moonbeam., my boat neighbor in Oyster Bay for many years. Joining her 5th August in Tonga then cruising Fiji until heading to OPUA last week of September.

Hi Joel, In the last 4 years Elyse has done some 15,000 miles of real blue water sailing across the atlantic, panama into the pacific and on to New Caledonia without any rig problems at all, apart

Hi Bob, look forward to seeing you. The SSB cruiser nets are a great way to find out who is where in the pacific area. What is the name of the boat you will be on? Danny SM 299 Ocean

Hello Bob, The autohelm linear drive fitted in my badly built 1986 Oyster 435 had those four plastic gears in the planetary drive. They had a life of about 15,000 miles and a replacement set cost £12

Eric Thanks for the invite, I would really like that as I am only now just getting out and about after surgery. Being home bound for the last few weeks has been torture. Drop me a line bob@...

Thanks Danny and all who offered thoughts. Yes I did think the windvane a bit of a stretch, I was only considering it due to future short handed cruising plans. I guess I'll look into fitting a spare

Hi Alan. I remember the commotion this boat caused while it was being built. As you know, it was done right and the engineering is to Amel standards so you probably have not had any collateral

No problem Eric...but you'll have to wait a bit. I'm in Australia and won't be back on the boat until July 4. Elyse is in Port Vila. BUT, I'll take pictures of all the parts and post them

Alan, Thank you so much for the photos. I would really appreciate seeing more photos or a sketch of this setup especially the mast fittings, the forward under deck plate and its attachment, and the

Hey Danny No problem, we are all family here Eric _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Danny and Yvonne SIMMS Sent: Saturday,

Hi Eric, sorry for the confusion. Forwad of the mainmast it would not be a mizzen stay sail I guess Danny ________________________________ To: amelyachtowners@... Sent: Saturday, 15 June

Hi Eric, I just posted 2 pics in a new folder called Elyse. Elyse has a furler on an inner forestay that was installed at the factory. The deck fitting is through bolted to a massive 12mm thick

Hi Danny, At the factory they called that the mizzen ballooner. I thought you had a staysail running forward of the main mast. Fair Winds Eric _____ From:

Hi Eric, The stay-sail halyard goes to the top of the mizzen mast. The tack of the sail is secures to a ring bolt in the deck about 600mm ahead of the windscreen. The tack of the sail is secured to

Bob, Would you like to join me for dinner at the Huntington Yacht club one night? Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi Danny, You mention you have a staysail. How is it rigged. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi Bob, good to see your name popping up on the site. Happy memories of your kindness to strangers when we met at Oyster Bay in 2009. Recently spent some time with Cameron Murray in Opua. As to wind