I have just found that the slinger on the shaft of this pump is spraying sea water. In my spares I have a ceramic seal and another seal without any instructions in a bag labelled Calpreda. I intend to

Hi everyone Can anyone tell me the length of the gearbox cable, as I'm not on my boat right now? It doesn't have to be down to an inch..... Rainer Huthmacher SM #69 "Yin Yang" Currently in Curacao

Hi 210 is a plastic cleaner that has 2 levels of product one for badly scratched and one for cleaning and lightly marked. It works very well on Lexan and other plastics. We have gotten it from

Hi Richard, What is 210? Anne and John, Bali Hai, SM2k 319 Sent: Tuesday, July 9, 2013 4:18 AM To: amelyachtowners@... Subject: Re: [Amel] SuperMaramu Windshield Further the reason

HI Trevor: That is a great description and a real resource. Thanks for posting. Gary

Hi Gary, I took the gentleman's way out on this one and used my cheque book, this time I didn't physically do the work but I was there for all of it. A Yanmar trained technician took off

Hi Trevor: I just want to make sure I understand this, DETAILS ARE IMPORTANT: 1. We are talking about the Yanmar seawater/freshwater coolant heat exchanger that sits atop the engine, correct? 2. To

Hi Eric, The Yanmar cooler will come out if you use a wooden drift like the thick side of a wedge and tap it gently with a mallet, but don't do it unless you have NEW gaskets as it won't

Eric, I have reviewed my notes and cannot find the photos I know I made when I did this in 2008. I do not remember any problems...it seemed straight forward at the time...possibly the tube assembly

Graham, I have a Perkins M60 - same as a Volvo MD22 so in the same family as yours. I'm not sure the wiring is identical but I think it works on the same system of an isolated engine. I wonder have

טוב לראות אותך בפורום

If you have one. Do you leave the key on when you press the stop button? On my Yanmar if you turn the key off you turn the electric off that operates the solenoid. Fair Winds Eric Amel Super

There were some posts recently about spray adhesive for fixing vinyl headlining. Hopefully the following links are useful for those with headlining problems and trying to find the right

I endorse all that Bill says about the excellence of Riza at EMEK Marin. Best wishes Peter Peter Forbes 07836 209730

If anyone is looking for haulout or authorized Amel technical service and/or Amel warranty service in the Eastern Mediterranean, you should come to Gocek, Turkey and meet Riza at Emek Marin. I have

Thanks a lot Alan Regards Lior 2013/7/8 eric <ericmeury@...> [Non-text portions of this message have been removed]

The "miracle" ingredient is in fact lanolin. The point is, that INOX and other lanolin based sprays / lubricants / greases etc are inherently HYDROPHOBIC...which means they repel water. Products

We have found DB marine in UK very helpful for spares . They sent our new engine to Phuket for us. Hope this helps, Mike & Chris Smither santorin sloop 'Akwaaba' > >

There has been much chat about solenoid s on the yanmar, but here is one on the Volvo. My engine won't stop electrically. I have verified current is getting to the solenoid on the HP fuel pump. Has

we tried using lexan for years but it was just too much maintainance for our jewelry store.. we went to buletproof 1/4inch glass in our windows and doors will stop a m4 round. however it doesnt take