What a wonderful Extra I was missing on my SM2000 a little place in the cockpit, where I could put some cups and bottles, when arrived in the port or for the ankerdrink. I did not like to use

Gary said : I had neglected to replace this seal on my toilet pump and at the three-year mark one of my toilet pumps ceased to work. Disassembly showed that the seal had failed, salt water had

For sure Mr Jean Yves Selo at the factory will be able to help. Mr Selo knows everything on Amels. email: AMEL@... ============================================================ From: DENNIS

Firstly a Happy New Year to All. I have over 120 messages backed up, so I am going to attempt to add my thoughts briefly to the several topics that have been raised. Heaving to I have done this many

Hi Joel: Any further word on the water maker salinity sensor/solenoid question? I am waiting with baited breath. I had previously purchased an electronic device for measuring the purity of the

Thanks John: I will check my weap holes. There was no part break-out for the motor and it's bearings. I did not try disassembly. Is the bearing something generic that you could get at a

Hi: I sent a reply already but it didn't show up for some reason. I will try again. Amel is able to provide technical support and parts for your boat. If the parts needed are proprietary to

Hi Gary, I thought that I had posted my experience about a year ago but cannot find it so I must have fouled up.On Bali Hai the forward pump started leaking through the weepholes in the plastic

NOTE: There is a typo in my previous message. The correct Part Number for the currently available pump is PN 37072-0094.

I thought I would give a heads-up to those who have the Jabsco Series 37245 Quite Flush Toilets on their boats. The service information provided by Jabsco (in you Amel book with all the other

I HAVE RECENTLY PURCHASED A NEGLECTED 1985 MARAMU WHICH HAS PROBLEMS WITH THE FURLING SYSTEM ON THE MAIN. AS NEAR AS I CAN TELL THE PROBLEM STARTED WITH A BOUND UP BEARING AT THE TOP OF THE FURLER

Alaskan Fisherman use Bag Balm, it's inexpensive and seems to work fine. Mike McCarthy Mango #15

John, could you give me a contact number for the Palma distributor, thanks Mark Shann (Maramu Synnefoula) Best Regards Mark Shann -----Original Message----- Sent: Tuesday, January 11, 2005

Thanks for that - I last searched the web for it in the summer & couldn't find it but it's there now. Seems to be only one distributor in Europe - in Palma. Don't know how my contact got

Web site for the prosuct is http://www.propspeedusa.com/ Jim Wiggin mcdougall@b...> wrote:

I had very severe problems of hard, barnacle type fouling on the prop of my SM330, berthed in Antibes (quite near to Paul - tonic 102004). In summer, max revs would drop to 1750 after about a month

Is there a reason why props should not be painted? I first painted a prop when I bought a Maramu ,( fixed blades)in Majorca ten years ago where, left unpainted, a prop was quickly covered in concrete

Hi Mark, Regarding flushing your waterr maker after the lay up period. Yes, chlorine does dissapate in your tank after a few months. To be on the safe side order a chlorine tester from Hach co.

Eric's posting on cleaning water tanks and hoses is excellent and thorough. We also use our charcoal filter every time we fill the water tank, ensuring that there is no chlorine in the tank, and

Here is some info I received about cleaning water tanks, Fair winds, Eric Freedman Sm 376 Kimberlite WATER TANK Although most people think only in terms of the tank, the plumbing is actually