Hello Peter, We are in Sicily and I have been fiddling with things to install AIS so our SSB is out of use for a few days. I will Email you again after it is all working next week. I might add that we

Hi Craig No, the pipes are in PVC or somilar, just the connection between the tank and the hose is by thin copper. We have also changed that, using a lot of irritation and bad words. It was a really

Here is your reply: The space for the name is: width: 41" height: 7.5" The space where hailing port is width: 33" height: 9.25" I also attached a link so that you can have a visual reference

Hi Bob,   I won't be able to provide any measurements until September when we go back down to the boat.  When I send the other photo you might be able to estimate the measurement by comparing the

Ian, Last year I had a similar challenge to get the pressure up to the cut off point. Adjusting the switch as suggest is necessary, BUT I found that after a storage period there was a build up of rust

Because letters can be different sizes I am looking for the horizontal measurement of the space available in inches for the first line (name) and second line (hailing port). Centimeters will work

Thanks Craig, Very timely article. I think Id like to be able to go to depths of 25-35 ft to allow retrieval of a fouled anchor. I'll do some more research and let you know what I come up

Somehow I don't think that solution would have ever occurred to me, Danny...Glad you took pictures so the rest of us will know what to do in a similar situation (~; Then again, I might heave to and

Hi Colin, I have uploaded a photo to the site. Ocean Pearl clearing the holding tank. Cheers Danny  ________________________________ To: amelyachtowners@... Sent: Wednesday, 31 July

Hi Ian, No, the pressure switch we have is not adjustable. We chose a powerful pump---40 psi from memory. Makes for a wonderful shower ! Ian and Judy, Pen Azen, SM 302 Malta

Good catch - I long ago changed all my Santorin plumbing to PVC and plastic holding tank with rubber vibration isolators - didn't know the SM had CU pipe. Craig on Sangaris, SN#68

I would be very careful in using any acid in your holding tank. The parts are NOT all non corrosive. The connecting pipe between the bottom of the holding tank and the down pipe to the valve is made

Hi Ian & Judy, thanks for this. I have a higher output pump (as an optional extra) than the standard which gives better showers. Are the pressure switches on your Jabsco adjustable? I have had the

Hi Bob,   We have the space for Solitude (first line) and Cowes (second line) on the transom of our SM.  The lettering was attached by Amel in Hyeres and is not obstructed by the handle on the

Hi, Does anyone have the total space available for the Name (first line) and Hailing Port (second line) on the transom for a Super Maramu? I have to get some new ones and am not at the boat. (does

Hi Colin, I sent it again, can you let me know if it came through. Danny ________________________________ To: amelyachtowners@... Sent: Wednesday, 31 July 2013 12:10 PM Subject: Re:

Hi All. another try for the photo. Danny SM299 Ocean pearl ________________________________ To: amelyachtowners@... Sent: Wednesday, 31 July 2013 12:10 PM Subject: Re: [Amel] rear

Oh, that must have been lovely being under there when the clog gave way. The joys of boat ownership! Mark SM2K #275 www.creampuff.us From:

Hi to all and tank so much to all, Problem solved ! - it was possible, as suggested, to insert up-down a long stick through the deck hole into the full tank. I used the spear gun rod, I'm a very bad

Hi Danny Where is the pic? If you attached it nothing came through? Sounds like it would be worth a good look. Cheers Colin Island Pearl II - SM2K #332 <simms@...>wrote: -- *Colin