Could you please let me know where I could purchase the rebuild a Fresh Water Pump Reya A66B and its rebuild kit ? (Unless I am mistaking, this is the fresh water pump that provides water to galley,

I ordered from Defender. [Non-text portions of this message have been removed]

Won't be sailing again this season. Giving my back a chance to heal, dealing with family illness, and working extra to try to get her paid for. Glad to hear you're getting to do what you enjoy.

Hi Duncan. They were $2.59 to $2.99 apiece for the smaller ones and ~$6.75 for the bigger (3-5") ones. I'm not sure how many we'll need but I bought 20 ea of three smaller sizes (5/8-2 1/2") and 10

Kent, just got word from Ideal that we have to buy $15,000/year to become a dealer. So I will check out the AWAB. Who was your distributor? Duncan Sent: Thursday, August 08, 2013 10:26 AM To:

Kent, I contacted Ideal directly at their Tennessee distribution center. I am waiting to see if they will sell them to me as a distributor. I have a friend who has a steel service center within a

Defender has AWAB 316 SS clamps at a better price than I could find Ideal.  Still pricey but peace of mind. Kent ________________________________ To: amelyachtowners@... Sent:

Is that the rotary or linear drive? Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of

Our forward head started to smell after about 3 years. That is the one used by my crew. To see if the smell was coming from the hose it was recommended that I take a hot wet rag and hold it around

My friend Eric Forsyth lost crew due to family issues. If you do not know of him look at www.yachtfiona.com He is a CCA Blue water medal recipient and has over 250,000 miles under

I just spoke to a customer service rep at Ideal who says the 316 stainless is their most corrosion resistant product. Their 316 clamps have stainless band and screw...some have ferrous band and SS

Buy the 300 it has less Fe (iron) in them. Regards Richard Piller Cell 603 767 5330

Hi Richard, Regarding your recommendation to buy Ideal clamps. The come in two grades of stainless; 410 and 300 both with 5/8” bands. Does it matter which grade? Duncan Sent: Wednesday,

Just spoke with Richard, at length and he confirms your remarks. Thanks for the help. Possibly you have heard, but he recommends that I remove all hose clamps on the Amel 54 as they have a mild

Duncan, Sorry for the bad grammar, there should have been a comma after ampage. What i meant was by the time you would wire the 6 volt batteries to give you 24 volts, you would neither

Hi All, We also had the problem of smell from the bilge going to the heads through the bilge pipe. I fixed it by putting a down facing elbow where the bilge pipe enters he bilge sump, then a short

Hi all, On the Amel and all previous boats the key to non smelling heads is as simple as long flushes. The flush must be long enough to remove the waste from the pipes and just leave water in

Hello all, Has somebody cleaned fuel tanks on Euros 41? Access seems to be very limited or is it impossible? Regards, Üllar

Bon Jour JeanLuc Are you asking about the outhaul line on the main boom?  If so there are previous discussions that should be found by searching "outhaul line".  Amel uses a kevlar line, I

I agree with Alan, any odor from the head, be it from a user or from a permeated hose will be delivered directly to the aft cabin by the AC. I found out that wrapping aluminum tape around the hoses