As Kent I can offer little in the formation of a new site, but would also be more than willing to contribute to the cost. Even if this site could continue with Yahoo into the future, if another site

Ian, In a previous post today I suggested using the autoprop grease nipple adapter and 5 mm nylon bolts. No corrosion !!! also , once you have the gearbox disassembled you can see where to mount the

Hi Dany, only O rings supplied by Dessalator have been used so there is more than ) ring size to this not uncommon problem. Compared to other brands of water makers that I have seen, the cross tube

I have the necessary IT background and would be happy to help out with this also, also I have a commercial server that could be used if necessary. I think the first thing though would be list the key

I recently contacted Leroy-Somer to see if I could get any spare parts directly there exact words were "Unfortunatly this SPECIAL unit was supplied to a machine maker in high volume, we cannot offer

Alain, If you have an autoprop, you can use the grease gun adapter and use 5 mm nylon bolts, no more corrosion. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

If you have a bow eye for snapping in your tether next to the wheel as I do just tie the wheel to the bow eye. However pad it otherwise the leather will get abraded. Fair Winds Eric Amel Super

When I started to unfurl the main this morning, the out-haul moved about a foot rearwards then stopped with an odd sounding noise. I stripped the gearbox down and found that the large gear driven by

Hello everyone, Does anyone have any spare outside back cushions for an Amel Santorin or knows where we can get them from? It would also help a lot if you could take measure and tell us the size

I like Mark's idea about having different threads about different subjects. One could go to one page and read all posts about that subject. We'd have to be much more careful about changing the

Good morning Bill and Amel owners, In very short, I host web site and own a commercial server, I don't want to make any promises, but when I have time (between my own work and learning/working on

Personally, I get so much from this group. Being a newbie, I am still in the stage of receiving more than I can contribute. Thank you to all those that give!!!! If someone were to host this as a

Hi All,   I suppose what we need is our own website, a computer whiz to define the structure and somewhere to host it.   It's probably a bit too hopeful that we could get Amel to host it on their

Hello Judy and Bill, Very interesting and worrying although the Yahoo site has become very hard to negotiate as it has so many posts and a not very good index. I was impressed with what little I could

If this is true then I think it is essential that we try to find an alternative that will also be able to archive the invaluable resource that is on this group. I am relatively new to this forum

All, Yahoo Groups may slowly fade away. Yahoo started the deconstruction of Yahoo Groups when they recently chose to discontinue RSS feeds. RSS is a format for delivering regularly changing web

It is not only the sea chest that can get clogged. Check these photos out: http://groups.yahoo.com/group/amelyachtowners/photos/album/1208267126/pic/list And it is not always clogging that causes

I added a photo to this album: Helm, Cockpit & Lazarette Anything located in these areas You can direct link to it here:

Hi, We too had the end cap split there,  once. I think the size of the O ring used on the steel cross piece is critical, too large and it puts excessive pressure on the plastic. When ours failed I

Hi to all, I had to replace, in 10 years, twice the caps for this problem. At the end Dessalator sent me a new connection, some mm shorter . Now the water pressure doesn't find any obstacle to the