Hello all, I purchased a 1998 Amel Super Maramu last year. I am upgrading the battery charger and need a 25 amp breaker. I would like to add the same type of breaker that is currently on the boat.

1 Feb 2005 I previously mentioned on this forum that I had fabricated a tool to make the job of pulling out the water pump impeller easier. I have uploaded a picture of the device to the photos

Joe, I want to thank you for the thought and attention that you put into your posting. I appreciate it very much. Fortunately, I haven't had to attack that problem yet. But I will keep your post

Dear Joel, Many thanks for taking the time to give us such comprehensive directions for repairung the headliner. Sounds like an onerous task. We don't recall seeing any paint 'n' paper shops in

Fellow Amel yacht owners, In response to Mr. Parry's request, I submit the following: Having sold hundreds of second hand Amel's over the past 25 years, I have had to face the restoration of

Hello. This is our first message since we bought our boat last July. Is anybody able to recommend a place where we can have our headliner replaced/repaired? The previous owner had it repaired using

I have bought the Amel set from Amel and it is perfect. Good quality and fits excellent in the divider tray. Dimitris _____ Sent: Tuesday, January 25, 2005 7:28 PM To:

Roy, We have used ceramic dishes from Dansk - always with a discount coupon!! We haven't broken any yet but if we do, they are not expensive. Our favorite is a fish shaped series that have a deep lip

Off Topic, but .... do any of you know where I can buy dinnerware that is European sized to fit Amel's divider tray? I have been to West Marine and Boat U.S. as well as a few local chandleries. They

I had a problem with the 160 l / hour watermaker on SM#331 which tripped the breaker when it was first put into service. There had been a seal failure problem with the pre-feed pump and I

Hi Roy and Eric, thanks for the tip to measure AC current and volts at the AC panel and not at the genset, thus enabling readings to be obtained both on shore power and with the Onan running. How

Hi, I installed an ammeter, voltmeter, frequency meter and a circuit breaker to the port of my AC panel. I wired it in such a way that I can measure what I am plugged into before I turn on the

--- In amelyachtowners@..., "Ian Shepherd" <g4ljf@c...> wrote: Roy, can you please > tell us what current it draws from your meter? Onan told me that the 6.5 KW > (renamed 7KW after

Hi John, I agree with you, but the Sailors do have one advantage. I keep my printer paper and envelopes in the same cupboard and the warmth does keep the paper dry! I also have an Icom 30 Amp 24/12

Well, it works! Just as B & G said it would. I now get the boats magnetic heading when 'Nav' is pushed on the Hydra display, and the true (not apparent) magnetic wind direction on the third push of

Hello Ian, I was surprised to see that Amel are still using this outdated technology. As I understand it these things are basically a lot of resistors which is why they have low ouitput and need to

Hi Paul, sorry to hear about all your problems. when you say that Amel said your high pressure pump was leaking, I assume that they meant that compressed water was leaking back past the pistons? I

Alas, it seems my memory is weakening. I finally spoke this weekend to the SM owner who first told me about the sensor issue. This is the corrected version of what he told me several years ago:

Hi, I have been following the discussion about running the washing machine and watermaker at the same time, with some owners reporting overloading the genset. A few years ago, I had Amel (in Hyeres)

Hey there....in response to you question on the watermaker and washing machine...I too like to make water while doing the wash. Until lately I have not had a problem running the both together. In