Good morning Terry ? Thank you so much for the info on the cost. How about the cost to repitch the blade? Thanks in advance. --------------------------------------------

Alexandre, here is what I paid. On visual inspection It does need a new bearing kit. All 3-blades bearings are worn & the blades loose on the hub. Cost for Bearing Kit - $851.83. Includes new

Hi Alexandre. I really do not have the specifics on what the original pitch and diameter was and now is. Geoff did consult with Brunton's in the UK and between them both figured out a profile that

Thanks, Bill.  I've read your earlier posts about CorrosionX and have used it extensively in my engine room.  Just thought this looks like an impressive product that may be effective in the marine

Kent, Microscopic corrosion on low voltage electronics will kill the item. I have revived, from the dead, about $10,000 worth of electronic gear by coating the electronics, boards, and everything

We are heading to the boat in early October after a trip to visit my future father in law in Budapest. Since my Marina is in the middle of NoWhere Virginia with virtually no stores in close driving

I've seen a commercial on TV about this product now distributed by RustOleum. It's really impressive on TV. I thought treating electrical and electronic equipment might help prevent corrosion.

I just finished servicing the cables on our -87 Mango. At the rudder the bushings were filled with a white powder, that I asume is from some kind of corrosion. At the wheel end, the grease in the

More than happy to help Giovanni. We are currently in Townsville and are intending to head to Morton Bay Brisbane for the summer, but we will just cruise around the bay as there are so many great

We left Libertad on the hard at the Bundaberg Port Marina from Nov 2012 to June 2013.  All boats on hardstand survived the cyclone/flooding of that season with no damage. Boats in the marina were not

Hi Conn & Colin, sorry for delay, we are sailing Vanuatu and internet coverage is somewhere very poor. Any way thanks so much for infos. May be next future I'll contact you for direct informations,

Hi. Our outhaul motor was being temperamental. When opened up, one of the motor magnets was surprisingly found to be fragmented into several pieces, and beyond repair. We now need a replacement motor,

Climma fan capacitors in the US are around $12 each. Contact info"at"coastalclimatecontrol.com Hope this helps. Bill BeBe

I received the price for the custom made Yanmar mixing elbow in 316 polished ss. I bought one and it is installed on BeBe. Photos of the part are here:

Bill, Your arch looks great ! I have a very talented friend with a machine shop and welds stainless quite well. I would very much like to fabricate a arch this winter. Could you provide the specs on

Thanks, Bill.  Nice! Kent ________________________________ To: amelyachtowners@... Sent: Friday, August 23, 2013 1:22 AM Subject: Re: [Amel] Solar panels for Amel Super Maramu

Hi Alexandre, and Bill, Yes, of course it is OK to use my name. Thanks for the pics, now I will have to wrap my old bones round the gen set and make the replacement. By the way buy the replacement

Hi Alexandre, Yes, of course it is OK to use my name. By the way buy the replacement capacitor in an electronics shop for €4 or 5 or get the same one from a Climma agent or other aircon mechanic

Kent, they were not rigged when that photo was taken. They are rigged now and work well to raise the dinghy and also the passerelle. Regarding the weight, it did not seem to make a noticeable

Just added some pictures to: http://nikimat.com/engine_room_fans.html John, let me know if this is ok to mention your name. Sincerely, Alexandre --------------------------------------------