|
Re: [Amel] RE: Pickling watermaker
Richard, Thursday is good, give me a call at home by 8 am. 410-348-2388 and let me know when and I'll tell you how to get here from 301. Its going to be 26 degrees tomorrow morning, but Thursday
Richard, Thursday is good, give me a call at home by 8 am. 410-348-2388 and let me know when and I'll tell you how to get here from 301. Its going to be 26 degrees tomorrow morning, but Thursday
|
By
Patrick McAneny
·
#14777
·
|
|
Re: [Amel] RE: Pickling watermaker
How about this Thurs. ?
Regards
Richard Piller
Cell 603 767 5330
How about this Thurs. ?
Regards
Richard Piller
Cell 603 767 5330
|
By
Richard03801 <richard03801@...>
·
#14776
·
|
|
Re: [Amel] RE: Pickling watermaker
Richard, I always run all my water through a charcoal filter from the tank. What is in the lines takes a lot of flushing to get rid of the awful taste. Nice to talk to you last week and Great Water a
Richard, I always run all my water through a charcoal filter from the tank. What is in the lines takes a lot of flushing to get rid of the awful taste. Nice to talk to you last week and Great Water a
|
By
Patrick McAneny
·
#14775
·
|
|
Re: [Amel] RE: Pickling watermaker
Hi Pat to clean up the taste issues charcoal filter between your tank and fresh water pump taste issues should go away. And in the spring flush flush and flush some more and you'll have good water
Hi Pat to clean up the taste issues charcoal filter between your tank and fresh water pump taste issues should go away. And in the spring flush flush and flush some more and you'll have good water
|
By
Richard03801 <richard03801@...>
·
#14774
·
|
|
Re: [Amel] RE: Pickling watermaker
I just spoke with a Dessalator dealer up in New England about winterizing the watermaker, and they said all they do, is run potable, pink antifreeze through the watermakers and its good for several
I just spoke with a Dessalator dealer up in New England about winterizing the watermaker, and they said all they do, is run potable, pink antifreeze through the watermakers and its good for several
|
By
Patrick McAneny
·
#14773
·
|
|
Re: [Amel] RE: MAin outhaul line
I don't remember the exact lost retch line I bought, but it was too slippery at first. At someone's suggestion(I think it was John and Ruth on Moon Dog) I sprayed it with 3M contact cement. It
I don't remember the exact lost retch line I bought, but it was too slippery at first. At someone's suggestion(I think it was John and Ruth on Moon Dog) I sprayed it with 3M contact cement. It
|
By
Kent Robertson
·
#14772
·
|
|
Re: MAin outhaul line
Last time we were through LaRochelle I got replacement line from Amel for all the runs (outhaul, traveller, and jib cars). It was a three layer line with parallel core Kevlar surrounded by two woven
Last time we were through LaRochelle I got replacement line from Amel for all the runs (outhaul, traveller, and jib cars). It was a three layer line with parallel core Kevlar surrounded by two woven
|
By
Craig Briggs
·
#14771
·
|
|
Re: [Amel] RE: Watertight, my foot!
Later SM's have a water tight housing for the improved bow thruster with a drain to the engine room bilge to get rid of seepage past the seals. There is thus never water under the floor by the
Later SM's have a water tight housing for the improved bow thruster with a drain to the engine room bilge to get rid of seepage past the seals. There is thus never water under the floor by the
|
By
Ian Shepherd
·
#14770
·
|
|
Re: [Amel] chain counter
Eric,
I too had a problem with the sensor which showed by counting up on a hot sunny day. Trouble shooting was not productive but replacing the sensor cured the problem completely. I
Eric,
I too had a problem with the sensor which showed by counting up on a hot sunny day. Trouble shooting was not productive but replacing the sensor cured the problem completely. I
|
By
Ian Shepherd
·
#14769
·
|
|
Re: MAin outhaul line
Thanks Colin...that's good to know...and also others that have commented.
I'm going to the gold plated shop tomorrow and buy a length of Spectra and see how it goes.
I think the outhaul line is
Thanks Colin...that's good to know...and also others that have commented.
I'm going to the gold plated shop tomorrow and buy a length of Spectra and see how it goes.
I think the outhaul line is
|
By
Alan Leslie
·
#14768
·
|
|
Re: [Amel] MAin outhaul line
Alan,
I remember how to use the outhaul to tightly stretch the new line when installing.
Move the outhaul block to about 1 meter from the mast-end of the boom.
Tie a piece of 6mm line to the
Alan,
I remember how to use the outhaul to tightly stretch the new line when installing.
Move the outhaul block to about 1 meter from the mast-end of the boom.
Tie a piece of 6mm line to the
|
By
yahoogroups@...
·
#14767
·
|
|
Re: [Amel] MAin outhaul line
Hi Alan
Good to hear you are getting good time out sailing that beautiful boat of yours.
Our outhaul line on the main boom snapped under pressure (it was actually pretty warn before this and had been
Hi Alan
Good to hear you are getting good time out sailing that beautiful boat of yours.
Our outhaul line on the main boom snapped under pressure (it was actually pretty warn before this and had been
|
By
Colin - ex SV Island Pearl
·
#14766
·
|
|
Re: [Amel] RE: MAin outhaul line
Hi,
On our Santorin we found spectra had 10 per cent stretch and was too slippy. We replaced it with one of our older spare ropes. No worries now!
Mike , SV Akwaaba 027 santorin sloop
Hi,
On our Santorin we found spectra had 10 per cent stretch and was too slippy. We replaced it with one of our older spare ropes. No worries now!
Mike , SV Akwaaba 027 santorin sloop
|
By
Chris Smither <yachtakwaaba@...>
·
#14765
·
|
|
Re: MAin outhaul line
Thanks Bill,
My thoughts exactly...good to have confirmation
Cheers
Alan
SV Elyse SM437
---In amelyachtowners@..., <yahoogroups@...> wrote:
Yes, I have, and used the wrong kind of line before
Thanks Bill,
My thoughts exactly...good to have confirmation
Cheers
Alan
SV Elyse SM437
---In amelyachtowners@..., <yahoogroups@...> wrote:
Yes, I have, and used the wrong kind of line before
|
By
Alan Leslie
·
#14764
·
|
|
Re: [Amel] MAin outhaul line
Yes, I have, and used the wrong kind of line before switching to low-stretch line.
Also, it needs to be very tight...even the low stretch will stretch, so take this into consideration when rigging. I
Yes, I have, and used the wrong kind of line before switching to low-stretch line.
Also, it needs to be very tight...even the low stretch will stretch, so take this into consideration when rigging. I
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#14763
·
|
|
MAin outhaul line
We've had some issues with the outhaul line on the main boom...it stretches and sometimes gets jammed in the boom motor pulley and it won't wind out or in.
I've shortened it, re tied it..but it still
We've had some issues with the outhaul line on the main boom...it stretches and sometimes gets jammed in the boom motor pulley and it won't wind out or in.
I've shortened it, re tied it..but it still
|
By
Alan Leslie
·
#14762
·
|
|
Re: Watertight, my foot!
Sorry for the late reply Kent / Bill...we've been at sea for the last week...great trip by the way...Noumea to Opua.
YES that's exactly what happens.....going to windward in heavy seas on st'bd
Sorry for the late reply Kent / Bill...we've been at sea for the last week...great trip by the way...Noumea to Opua.
YES that's exactly what happens.....going to windward in heavy seas on st'bd
|
By
Alan Leslie
·
#14761
·
|
|
Re: [Amel] Chain Counter
On 4/12/10, I received this email this email from fax_orders@...
I placed the following order via phone:
Eric, review thiese photos:
On 4/12/10, I received this email this email from fax_orders@...
I placed the following order via phone:
Eric, review thiese photos:
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#14760
·
|
|
Re: [Amel] Chain Counter
By
eric <kimberlite@...>
·
#14759
·
|
|
Chain Counter
Eric,
May 7th 2008 Message no 3834. Sensor part no IB 5076 from www.ifm.info
Good luck,
Trevor
Seafever
SM425
Eric,
May 7th 2008 Message no 3834. Sensor part no IB 5076 from www.ifm.info
Good luck,
Trevor
Seafever
SM425
|
By
seafeverofcuan@...
·
#14758
·
|