Pat, Do you have more info on this company. I tried use the Google but they do not come up. Mark Cream Puff SM2K #275 www.creampuff.us

All, I removed and cleaned, rebuilt, and replaced old/worn parts on the Eno stove. I am sure that you are aware that it is out of production. I was successful in finding parts for a rebuild of our Eno

http://mediraj.com.pl/fjr/w_news.php Veit M

Thanks Gary, If there are any changes to your final order, will you let us know and/or upload a copy? Bill BeBe, 387

Hi Capt.Richard, my exhaust pipe is fixed in the thru-hull as wat picture message #16386 Kristy SM243???

Thanks Eric. Joel says that's standard configuration. Kent

Kent, My exhaust looks similar. I think they just epoxied the hose intothe hole. Fair Winds Eric Kimberlite SM 376

Thanks Joel, deep breath, wheeeew. Are there any drawings of how it's Designed? Curious what geeks the water out. Thanks again, Kent SM243 Kristy

Kent, this is the standard Amel installation for the exhaust. All the best, Joel Joel F. Potter - Cruising Yacht Specialist, LLC Amel's Sole Associate for the Americas Mailing Address:

Hi, all, I'm getting Kristy's bottom painted at the Tiger Point Marina in Fernandina Beach, FL. As they were scraping the bottom they noticed that the exhaust port for the generator has what appears

Hi Gary, Glad you got connected with Sylvie at ACMO and their 7,500 Euro quote sounds excellent. Even better is only 730 for shipping. I can assure you the Turnbuckles (Ridoir) all come with new

As new there was one maybe two heavy duty hose clamps on that hose and a ground wire. The hose is fitted around a thru hull with the hose fitted to a screwed to the thru hull ball valve having a

Hi Richard I read your answers. Thank.you. Can you tell me if the hose ia attached into the thru hull only with sealants or has a metal end? Becasue i saw a screw in the fiberglassthru-hull trunk.

Ornella, there is no easy way to replace that hose. Given the age of the boat is probably well attached to the fitting for cutting it off is the only safe solution. If you use heat that close to the

Hello Richard, the problem is precisely to change the exhaust pipe and then remove it from the thruhull. The boat is Santorin 122 built in 1995. I do not know how the tube is inserted into the hull

Mark, You may want to consider having your wheel done by ColorWheelzs if you are in the U.S. We had ours done several years ago and are very pleased with the appearance and feel and the ease to

Hi again. The best way to remove the hose from that fitting that goes through the hull is to cut the hose. I use a Dremel tool many times with the cut off wheel and very carefully cut through the hose

Hi please give us the year and model of your boat. It is assumed that you want to remove the hose from the thru hull fitting. Please confirm. Thanks. Regards Richard Piller Cell 603 767 5330

The 24v pump or the bellows type foot pump are OK for mostdinghies but for the later generation with high pressure hulls and or floors theAmel type pump cannot cope and when I had a high pressure hull

Good morning, sorry the previous message is incomplete. I need to replace the exhaust pipe of VPMD22L. The pipe is a tube VETUS 60mm. But I don't know how to remove it from the fiberglass