Hi Kent buy a new one, safety first best regards Hanspeter Tamango 2 , SM #16 Krusadasi, Turkey (actual with out twitter and youtube, mr erdogan, Prminister of Tukey is a littel bit angry :-) I think

I've also discovered that the last 100ft or so of my anchor chain is rusted into a huge solid mass in the chain locker. I've sprayed a ton of PB Blaster on it and beat it with a hammer without much

I have just hauled Kristy out to repaint the bottom after 2 1/2 years. She's been sitting in the water in a marina at Brunswick GA for the last 2 years where I've hired a diver to clean the bottom

I have just posted photos of our new security system for the companionway. As you can see the feature can be used both when leaving the boat as a extra strength to locking the companionway and when

Bill, Would you please email me the stove photos and instructions as tohow to replace the igniter? On my computer half of what you wrote is cut off. Fair Winds Eric Kimberlite SM 376

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Eno Owners manual and parts list.pdf

I've just posted the parts list - diagram and numbers for the ENO 4 burner Bretagne. Cheers Alan SV Elyse SM437

I'll be right there! Just got the SSB up and running - yeah! I still have a little RFI on the AIS. I need to move the AIS antenna away from the SSB antenna and install a couple of ferrites. All is

Mark, I was in a sewing shop/bimini maker/sail loft today and they were making a new leather cover for a helm wheel. I know Turkey is a long way from you, but possibly this will give you an idea of

Mark , You will find it at , info@... . Colorwheelz was a family owned business and has apparently been bought by Scandia. But its still the same product and pricing. The one thing, if you choose to

Pat, Do you have more info on this company. I tried use the Google but they do not come up. Mark Cream Puff SM2K #275 www.creampuff.us

All, I removed and cleaned, rebuilt, and replaced old/worn parts on the Eno stove. I am sure that you are aware that it is out of production. I was successful in finding parts for a rebuild of our Eno

http://mediraj.com.pl/fjr/w_news.php Veit M

Thanks Gary, If there are any changes to your final order, will you let us know and/or upload a copy? Bill BeBe, 387

Hi Capt.Richard, my exhaust pipe is fixed in the thru-hull as wat picture message #16386 Kristy SM243???

Thanks Eric. Joel says that's standard configuration. Kent

Kent, My exhaust looks similar. I think they just epoxied the hose intothe hole. Fair Winds Eric Kimberlite SM 376 From: amelyachtowners@...[mailto:amelyachtowners@...] On Behalf Of

Thanks Joel, deep breath, wheeeew. Are there any drawings of how it's Designed? Curious what geeks the water out. Thanks again, Kent SM243 Kristy

Kent, this is the standard Amel installation for the exhaust. All the best, Joel Joel F. Potter - Cruising Yacht Specialist, LLC Amel's Sole Associate for the Americas Mailing Address:

Hi, all, I'm getting Kristy's bottom painted at the Tiger Point Marina in Fernandina Beach, FL. As they were scraping the bottom they noticed that the exhaust port for the generator has what appears