Can anyone help me answer these questions regarding the original Maramu electrical master switch setup: 1. Can the selector be rotated both clockwise and counterclockwise without causing harm to the

I owned a Maramu (#102) for 16 years and sold her 5 years ago to purchase our current Super Maramu 2000, so these answers are based on my memory and should be confirmed with AMEL or another

We lost our port forward sail locker covers (2) in Katrina. Would appreciate any suggestions on their replacement. John and Anne "Annie M" Amel Mango Hull Number 1

G'day Roger, Thankyou again for advice, looks like our problems were identical and both caused by fresh water. Approx 12 months ago I made the unpleasant discovery but instead of removing the shower

Hello All, My last boat was an Oyster 435 sloop rigged ketch. After checking with Oyster I had it converted to what they called a slutter rig. A new forestay complete with sheave box was fitted about

Hallo John, I own a SM 143 (1995) and would like to explore the possibility to upgrade to a SM of a somewhat younger date. Would you be so kind and let me know more about your boat. In particular I

http://www.boatus.com/boatgraphics/names/top10.asp top ten boat names according to boat u.s. from 1991 to 2004 serenity seems to be a perenial favorite. enjoy

I have an Amel 54 on order and my SM2000, "Silver Cloud" no 330, launched May 2001 with Yanmar engine specification, is for sale. This is a very lightly used French Med boat in excellent condition.

Today I replaced my teak passerelle steps with this plastic teak like material. The material was 1x 4" worked perfectly. I had this material on my last boat and it held up a lot better than teak.

Today I replaced my teak passerelle steps with this plastic teak like material. The material was 1x 4" worked perfectly. I had this material on my last boat and it held up a lot better than teak.

Hi Mike You're reminding me now of some more detail. Our shipwright had to take out the shower tray and renew the inner layer of the double skin bulkhead from the shower tray downwards. At that

G,day Roger, Thankyou for info, design under main mast sounds the same and I think water ingress from base of mast is most likely as was the case for your Mango. I have noticed water draining into

Hi Mike I've had the same problem with my Mango no. 28 (the direct precursor of the SM). We had rot in the compression post under the main mast which our surveyor did not find. The problem did not

The stay is attached through a T shaped that passes through a hole in the profile. the solent is on a profurl furler.

Wilfrid, Thanks for the info. Sounds like a very good idea to me to increase options of point of sail and to save wear on the genoa. Glad to hear it can be easily rigged on this model boat. Judy

How is the stay attached to the mast? Fair winds, Eric Amel Super Maramu #376 _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of

G,day all, We own Maramou # 147, and I wish to warn owners who may face this problem: after heavy rain we find fresh water in the hold under the fwd head. (Still unable find where it leaks in). The

-I have added one on my own. The stay is attached to the central vertical split grp panel with two stainless stell plates. The solent is 25sqmeters (250 square feet?) works fine and avoid destrying

is there anyone out there who could help me with collecting data to the whereabouts and ownerships of my recently bought amel maramu #89? i have only very few data and would love to find out more

beeing new to the group, i don't know if the topic has been talked through already... i heard, that it is not good to wire / install certain sensor cables from raymarine in paralell to the course