(spelled both ways to enable future searches) I recently received my bowthruster bow thruster replacement tool from Amel...with no instructions. I have heard that the written instructions that Amel

Hello Kiwi, I had the same problem with the elbow on the Volvo on my last boat when we were in Australia. A spare could be flown over from Sweden and would have cost about £650 including delivery. A

I believe the perkins 4-108 is the same as a westerbeke 40. Hansen marine -marblehead massachussets Sells these parts. Fair Winds, Eric Amel Super Maramu #376 _____ From:

I also need to replace the temp. overheat switch (it triggers the alarm) and can't find one in the States. Anyone know who has this part? Thanks

It's time to replace the exhaust elbow and I am having problems finding the right one in the US. Anyone have a source or advice? Thanks

Hi As most of the boat owners, your glad when you buy your boat, and your glad when you sell it. But with an Amel you will find out later that you have sold something special. This is the reason

Many thanks to Charlie and Volker for your enlightening and interesting responses. Alex Paquin Simpatico Maramu hull# 94 Caracas, Venezuela

Hi Alex, I just took my selector apart a few days ago and learned something interesting: In the Secours position only the service battery bank will start the engine. The engine battery does not have

Can anyone help me answer these questions regarding the original Maramu electrical master switch setup: 1. Can the selector be rotated both clockwise and counterclockwise without causing harm to the

I owned a Maramu (#102) for 16 years and sold her 5 years ago to purchase our current Super Maramu 2000, so these answers are based on my memory and should be confirmed with AMEL or another

We lost our port forward sail locker covers (2) in Katrina. Would appreciate any suggestions on their replacement. John and Anne "Annie M" Amel Mango Hull Number 1

G'day Roger, Thankyou again for advice, looks like our problems were identical and both caused by fresh water. Approx 12 months ago I made the unpleasant discovery but instead of removing the shower

Hello All, My last boat was an Oyster 435 sloop rigged ketch. After checking with Oyster I had it converted to what they called a slutter rig. A new forestay complete with sheave box was fitted about

Hallo John, I own a SM 143 (1995) and would like to explore the possibility to upgrade to a SM of a somewhat younger date. Would you be so kind and let me know more about your boat. In particular I

http://www.boatus.com/boatgraphics/names/top10.asp top ten boat names according to boat u.s. from 1991 to 2004 serenity seems to be a perenial favorite. enjoy

I have an Amel 54 on order and my SM2000, "Silver Cloud" no 330, launched May 2001 with Yanmar engine specification, is for sale. This is a very lightly used French Med boat in excellent condition.

Today I replaced my teak passerelle steps with this plastic teak like material. The material was 1x 4" worked perfectly. I had this material on my last boat and it held up a lot better than teak.

Today I replaced my teak passerelle steps with this plastic teak like material. The material was 1x 4" worked perfectly. I had this material on my last boat and it held up a lot better than teak.

Hi Mike You're reminding me now of some more detail. Our shipwright had to take out the shower tray and renew the inner layer of the double skin bulkhead from the shower tray downwards. At that

G,day Roger, Thankyou for info, design under main mast sounds the same and I think water ingress from base of mast is most likely as was the case for your Mango. I have noticed water draining into