Thanks, Mark and Bill, I think I know what I want now, I'm on the hunt! Kent From: "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]" To: "amelyachtowners@..." Sent: Monday, May

Yes it's definately 24v. We replaced it twice. Same problem both times. Last one used is an Asca unit No problem with the wiring. Peter SM 433 Pure magic On 12 May 2014, at 09:35, "'Bill & Judy

My guess, is that it is a 12V. And, BTW, I saw some Chinese-made solenoids that were labeled 24V that were actually 12V. Bill BeBe 387 On Mon, May 12, 2014 at 1:27 PM, Richard03801 richard03801@...

Hi are you sure it's a 24 volt unit. Regards Richard Piller Cell 603 767 5330

We discovered that the original solenoid had cracked. We fitted a replacement which is exactly the same but have found that it heats up to an alarming level, ie too hot to hold. Is this normal or what

Bill, I tried to upload the file also and each time I get "an error occurred..." Alan SV Elyse SM437

I would be interested in this document to compare notes - I did the same thing two weeks ago with the Leese-Neville alternator and a sterling digital 24v regulator - I also took some pictures - It was

Two times this morning I tried to upload a PDF file and get errors. I am not sure why...the first time with Chrome, the second time with IE. I will continue trying to upload the file: Super Maramu

Here is the photo of the windlass: https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1454030119/lightbox/848353597 Bill BeBe 387

Adding to what Alan said: Lofrans makes 3 sizes of gypsies for the Tigres 1200, standard on the SM2k: #276f for 3/8" DIN 766 #276g for 3/8" BBB #276h for 3/8" HT BeBe's gypsy, when new from Amel, was

Hi MichaelNext week end I will copy the references of the alternator and take photos of it and send you themJosé ORION AMEL 54

Kent, Have you tried: http://www.mcmaster.com/ Best regards, Mark SM2K #275 www.creampuff.us

Thanks Richard, Bill, and Alan. So far I haven't found this size online. Is the HT or the 30 Grade readily available in the 10mm dia 30mm inside length in the US? Kent From:

Kent most SM's come with 10 mm HT chain. it's easy to take off the gypsy and take it with you when you buy new chain. Is look at an industrial supply house to buy it in the length you need. It going

The chain link size has to be very close to the gypsy size other wise the chain will jump....mine is labelled HT 3/8 P30, which means 3/8" or 10mm wire size and 30mm link length (inside measurement) ,

Kent, Look at the gypsy...I am sure it is marked. If you do not buy the same 10mm chain, the gypsy to fit what you buy will cost between $300 and 400 CW Bill Rouse BeBe 387 sent from my tablet On

Sorry, but I couldn't make the search engine work for me. I know that there are some prior discussions about anchor chain sizes and quality, but I can't find them. I'm ready to order some new chain

Can anyone with a 2007/8 Amel 54 with a Volvo D3 tell me the make and model of the high output 24V alternator fitted by the factory. A photo would be much appreciated. Thanks, Michael

Most welcome Gary! Glad I could help! Have a great day! Alexandre --------------------------------------------

Thank you, Alexander. I did just that and it worked fine. Much appreciated!