|
Re: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243
Here is the photo of the windlass:
https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1454030119/lightbox/848353597
Bill
BeBe 387
Here is the photo of the windlass:
https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1454030119/lightbox/848353597
Bill
BeBe 387
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#16792
·
|
|
Re: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243
Adding to what Alan said:
Lofrans makes 3 sizes of gypsies for the Tigres 1200, standard on the SM2k:
#276f for 3/8" DIN 766
#276g for 3/8" BBB
#276h for 3/8" HT
BeBe's gypsy, when new from Amel, was
Adding to what Alan said:
Lofrans makes 3 sizes of gypsies for the Tigres 1200, standard on the SM2k:
#276f for 3/8" DIN 766
#276g for 3/8" BBB
#276h for 3/8" HT
BeBe's gypsy, when new from Amel, was
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#16791
·
|
|
Re: 24V alternator
Hi MichaelNext week end I will copy the references of the alternator and take photos of it and send you themJosé ORION AMEL 54
Hi MichaelNext week end I will copy the references of the alternator and take photos of it and send you themJosé ORION AMEL 54
|
By
ESTELLER
·
#16790
·
|
|
Re: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243
Kent,
Have you tried: http://www.mcmaster.com/
Best regards,
Mark
SM2K #275
www.creampuff.us
Kent,
Have you tried: http://www.mcmaster.com/
Best regards,
Mark
SM2K #275
www.creampuff.us
|
By
Mark Erdos
·
#16789
·
|
|
Re: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243
Thanks Richard, Bill, and Alan. So far I haven't found this size online. Is the HT or the 30 Grade readily available in the 10mm dia 30mm inside length in the US?
Kent
Thanks Richard, Bill, and Alan. So far I haven't found this size online. Is the HT or the 30 Grade readily available in the 10mm dia 30mm inside length in the US?
Kent
|
By
Kent Robertson
·
#16788
·
|
|
Re: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243
Kent most SM's come with 10 mm HT chain. it's easy to take off the gypsy and take it with you when you buy new chain. Is look at an industrial supply house to buy it in the length you need. It going
Kent most SM's come with 10 mm HT chain. it's easy to take off the gypsy and take it with you when you buy new chain. Is look at an industrial supply house to buy it in the length you need. It going
|
By
Richard03801 <richard03801@...>
·
#16787
·
|
|
Re: Anchor Chain for Super Maramu 243
The chain link size has to be very close to the gypsy size other wise the chain will jump....mine is labelled HT 3/8 P30, which means 3/8" or 10mm wire size and 30mm link length (inside measurement) ,
The chain link size has to be very close to the gypsy size other wise the chain will jump....mine is labelled HT 3/8 P30, which means 3/8" or 10mm wire size and 30mm link length (inside measurement) ,
|
By
Alan Leslie
·
#16786
·
|
|
Re: [Amel Yacht Owners] Anchor Chain for Super Maramu 243
Kent,
Look at the gypsy...I am sure it is marked.
If you do not buy the same 10mm chain, the gypsy to fit what you buy will cost between $300 and 400
CW Bill Rouse
BeBe 387
sent from my tablet
On
Kent,
Look at the gypsy...I am sure it is marked.
If you do not buy the same 10mm chain, the gypsy to fit what you buy will cost between $300 and 400
CW Bill Rouse
BeBe 387
sent from my tablet
On
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#16785
·
|
|
Anchor Chain for Super Maramu 243
Sorry, but I couldn't make the search engine work for me. I know that there are some prior discussions about anchor chain sizes and quality, but I can't find them. I'm ready to order some new chain
Sorry, but I couldn't make the search engine work for me. I know that there are some prior discussions about anchor chain sizes and quality, but I can't find them. I'm ready to order some new chain
|
By
Kent Robertson
·
#16784
·
|
|
24V alternator
Can anyone with a 2007/8 Amel 54 with a Volvo D3 tell me the make and model of the high output 24V alternator fitted by the factory. A photo would be much appreciated.
Thanks,
Michael
Can anyone with a 2007/8 Amel 54 with a Volvo D3 tell me the make and model of the high output 24V alternator fitted by the factory. A photo would be much appreciated.
Thanks,
Michael
|
By
Michael Last <lastmd@...>
·
#16783
·
|
|
Re: [Amel Yacht Owners] Pump Out ... SM
Most welcome Gary!
Glad I could help!
Have a great day! Alexandre
--------------------------------------------
Most welcome Gary!
Glad I could help!
Have a great day! Alexandre
--------------------------------------------
|
By
Alexandre Uster von Baar <uster@...>
·
#16782
·
|
|
Re: [Amel Yacht Owners] Pump Out ... SM
Thank you, Alexander. I did just that and it worked fine. Much appreciated!
Thank you, Alexander. I did just that and it worked fine. Much appreciated!
|
By
Gary Wells
·
#16781
·
|
|
Re: [Amel Yacht Owners] Pump Out ... SM
Good morning Gary,
Here is what I did:
I purchased a 1 inch 1/4 (from memory - check with the fitting on the pump). A hose of 75 cm or 30 inches long
The pictures will make more
Good morning Gary,
Here is what I did:
I purchased a 1 inch 1/4 (from memory - check with the fitting on the pump). A hose of 75 cm or 30 inches long
The pictures will make more
|
By
Alexandre Uster von Baar <uster@...>
·
#16780
·
|
|
Pump Out ... SM
Feeling like a total newbie, we cannot seem to get suction started to empty either holding tank. The tanks ate nearly full as we can look in and see slurry but I'm not sure if there's a drop-in
Feeling like a total newbie, we cannot seem to get suction started to empty either holding tank. The tanks ate nearly full as we can look in and see slurry but I'm not sure if there's a drop-in
|
By
Gary Wells
·
#16779
·
|
|
Re: [Amel Yacht Owners] Re: Mainsail Incident
Hello Gary,
thanks for pointing out the piece of rope to hold the winch handle. I am sure that I still have all the various bits of rope that Amel supplied, though I have long forgotten
Hello Gary,
thanks for pointing out the piece of rope to hold the winch handle. I am sure that I still have all the various bits of rope that Amel supplied, though I have long forgotten
|
By
Ian Shepherd
·
#16778
·
|
|
Re: Rusted Ball of Chain in the Chain Locker
Yes.
Mr Rusty's experience prompted us to open up or chain locker, inspect, and vacuum the locker, just some sand and leaves.
Yes.
Mr Rusty's experience prompted us to open up or chain locker, inspect, and vacuum the locker, just some sand and leaves.
|
By
ericmeury@...
·
#16777
·
|
|
Re: [Amel Yacht Owners] Insurance - single handed
TopSail (contact: Daniel Groves, daniel@...) insures us for single handed sailing aboard our SM2K. Our premium last year was approx US$1900 (we use a high deductible). That covered us from Cape
TopSail (contact: Daniel Groves, daniel@...) insures us for single handed sailing aboard our SM2K. Our premium last year was approx US$1900 (we use a high deductible). That covered us from Cape
|
By
Mark Hayden
·
#16776
·
|
|
Re: [Amel Yacht Owners] Insurance - single handed
Thank you,
Veit
Sent from my vm iPad
Thank you,
Veit
Sent from my vm iPad
|
By
Veit Mueller <veitm@...>
·
#16775
·
|
|
Re: [Amel Yacht Owners] Insurance - single handed
For our quick 3 months direct Atlantic, Panama and Pacific crossing from Canary Islands direct to Australia Pantaenius (UK Office) seemed to be the best we could get at the time. They came highly
For our quick 3 months direct Atlantic, Panama and Pacific crossing from Canary Islands direct to Australia Pantaenius (UK Office) seemed to be the best we could get at the time. They came highly
|
By
Colin - ex SV Island Pearl
·
#16774
·
|
|
Re: [Amel Yacht Owners] Insurance - single handed
Veit, His name is Scott Stusek , he is a sailor himself and is very willingto take time to explain and answer questions. His cell is 914 217 7991 office ,443 569 7995. I found that the policy had few
Veit, His name is Scott Stusek , he is a sailor himself and is very willingto take time to explain and answer questions. His cell is 914 217 7991 office ,443 569 7995. I found that the policy had few
|
By
Patrick McAneny
·
#16773
·
|