Hello Terry, Mine (SM2K #289 now NIKIMAT) came with a removable bow spirit installed by the (long term) previous owner. As I mentioned previously for the staysail, he is in my opinion a very

Hi Kent - I never spotted any manufacturer's identification on mine, unlike the boom and mast reduction gears that were clearly marked "Bonfiglioli". There was a motor manufacturer's nameplate, but

OK .. Got it! Thanks. It was just stuck hard. Two properly placed pry bars and a tap on the shaft with a plastic hammer did the trick. I'm just shy yet, I guess.

Yes Gary, there's a pin that hola the hub on the shaft. The nylon bolts hold the prop on the hub. Once the bolts are out you can pull the prop off...be careful the pin doesn't drop out and get lost

Hi all. Requesting your forbearance on a newbie question, but aside from 6 nylon screws and some friction, what else holds that bow thruster prop in place? I see on the photos and diagrams that

Good day, I would like to get an idea of how many Amel owners have retrofitted their boats with light Air sails and of more interest how often are they used. I am specifically referring to Spinnakers,

I'm still hoping someone can help me identify the manufacturer and model of my genoa furler. I don't understand why Maud/Emilie are having a problem with my order of parts, but they say they need

I suspect that the built in waterline being topsy turvey maybe because the line was originally correct when Amel was making a shorter modelperhaps the Maramu. Then they lengthened the mould each time

Hello Bent, My post of 29/09/14 gives an answer asfollows:- , In case it helps, on my previous boat, an Oyster 435I had an inner forestay fitted but it was fixed less than three feet from thetop of

Same issue with any address. You need to spell it in a way is does not look like an email address. I guess Derick advice is ok. Group Moderator

Hello Bill, Thank you. Would you have a model number? Thanks Jean-Pierre Germain SY Eleuthera (in refit in Turkey)

There are 3 hoses attached to the propeller shaft, one hose has a greese container with a T handle to turn and force the grease into (or around) the shaft. What kind and grade of grease should be

We bought a Chinese made Madea brand 230V 50htz combo grill microwave while in Bonaire in 2007. It has a stainless steel front and fit perfectly. I am sure that they have probably changed models in 7

Hello Brethren Amel Lovers, I have a very mundane question; we need a new MW/Grill/Convection unit. TWTMBO (... must be obeyed) wants a more multi tasking unit. Anyone have suggestions? Limited by

Colin, I think Alan was telling you that Yahoo truncates email addresses from your email and he does not know what comes after the @ symbol. You will have to spell it out for him using "at" instead

What about backstays? I would expect that this was required, at least in heavy weather?

Hi Alan Please send to colin.d.streeter@... instead then. No urgency if I have missed you. Wishing you great sailing conditions Colin Streeter Island Pearl II, SM#332 Mackay, Australia -- Colin

Hi AlanWe are in Italy and our godson just joined us bringing some chemicals from his girlfriend's place: material used by the winemaking industry! He was assured they were comparable... They are

But you'll have to be quick...we clear out for Noumea tomorrow morning ! Cheers Alan SV Elyse SM437 Fiji