Hello Derrick, I thought the mizzen ballooner came standard with the sock... I have to thanks the previous owner for that! Yes, this is so easy to use with the sock (of course I can not compare

Alexandre, I don't have a spinnaker, but I do have a mizzen ballooner. What size is your mizzen ballooner sock from ATN? That seems like a worthwhile addition. anything you would change about

Gary, I will be very interested in the cost of this. We have it in our plan to replace standing rigging on Cream Puff next summer and I would like to budget for this. We too wish to keep it as

Kent, Do you have the part numbers for the bow thruster lip seal and the prop shaft lip seals as used by Carolina Seal? Are these both 60mm, but different types of seals? I have not yet changed

As has been mentioned on this forum several times, there seems to be quite a difference in price when replacing the standing rigging from ECMO (Amel's Original Equipment Manufacturer, OEM) if you use

Hi Keith: Sodium and Potassium metabisulfite are just different salts of the same metabisulfite moiety. They can been used interchangeably as far as I can determine in examining their Material Data

We had a 2,500 euro deductible with SevenStar Male to Marmaris. Bill BeBe

Good morning Alain, That is pretty nice you don't need any running backstay! I noted you mentioned heel average 20° with the genoa, unless I am mistaking I believe the longer waterline is at 15°,

Hello all, last winter in Marmaris, we equipped Pilgrim with an inner forestay, furler and staysail (27 sqm). I created a folder with pictures taken during initial tests at sea. SM2K Pilgrim's inner

Bill and Kent, Yes, the damage will be covered by the transport insurance but with a 7000 deductible :-( Normally I have a lower deductible, but with Sevenstar Transport it was a package deal with

Hi, Curt. Welcome to the group. Follow Bill's advice and the instructions you've downloaded, and you'll be fine. If you search through the site, you'll find several threads about the prop seals.

Hello Kent,If you are still looking for a knob, I can help you.I am going to take a picture of this part on a SM. If we speak about the same part, I will probably be able to delivery it.We keep in

Craig, Wasn't the lightening strike covered by the included transport insurance? Bill BeBe 387 On Fri, Sep 12, 2014 at 12:41 AM, Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...>

Curt, If I were you, and since this is apparently your first time, I would order the things you need from Amel (sav"at"amel.fr). The following is the list I gave Amel for Super Maramu 387 parts will

Terry, Crossing the Pacific, we used the double headsails for any wind direction of 155 Port to 155 Starboard. We do have an Asymmetrical which we attach to the bow roller...we do not use the

I have downloaded and read the various PDF files re. thruster maint. and seal replacement. Thanks very much to those that have posted those files. Our Maramu is in Fajardo, PR and I intend to do the

It has a pin that goes through the middle like a shear pin. The nylon bolts hold it all together. The nylon bolts are the shearing parts, not the metal pin. It us simple and it works (recent

That's what I thought, too. The CDrive is definitely an proprietary Amel part. Did you find someone to work on your electrical/electronic problems? Kent

Hello Terry, Mine (SM2K #289 now NIKIMAT) came with a removable bow spirit installed by the (long term) previous owner. As I mentioned previously for the staysail, he is in my opinion a very