I sent some pictures directly to Eric last night. Andrew Ronpische SM2k 472 Canet en Roussillion, France From: amelyachtowners@... [mailto:amelyachtowners@...] Sent: Monday,

Eric, I will be returning to Brava on Feb 28th, and can take the pictures you want if no one else gets to it sooner. Derick SM2K #400 Brava In St. Thomas, USVI (but I am snowbound in

Colin, In 2011 we were in Cochin, India when we decided that the risks in the IO, GoA, and Southern Red Sea were too high. We put together the first of many transport ships to the Med from that area.

Hi Terry & Dena From all of us on the forum wishing you guys a fantastic trip on the Blueplanet Odyssey. Nice to see Amel represented there for a good cause. MV Island Pearl II would also have liked

Eric Unfortunately I am travelling and will not be back at the boat for a few weeks. Could someone else on the forum perhaps help Eric with this? Best Colin Streeter Island Pearl II, sm #332

Hi I did not think that the relays in the box in which is the regulator are in relation with fans. I will be in ORION next week end end and I will look how the fans are connected. I suppose that

Hey Bill, I agree with your take regarding the original Speedseal…. the Life is a nice improvement as the blades sides do not run on a dry surface if water is slow to prime. The tips are more

The new yanmar impellers are threaded on the inside for the first ¼ inch. They sell a bushing that screws in to the impeller and then a bolt threads into the center of the bushing. Just turn the bolt

JP, I did not mention the Speedseal Life, because I know nothing about it. However, your description makes a lot of sense and hopefully SpeedSeal has impeller improvement figured out.. Frankly, I

Hello Bill, There could be a misunderstanding here. Speedseal produces 2 kits: standard Speedseal and the Speedseal Life. I agree with your assessment of the original Speedseal but the Life unit is

Hello Ron, I hate to ask, but is the fan still working? Could you connect it directly to the appropriate voltage? I had the same problem (on my Super Maramu 2000) both engine and genset fan were

I am a little late to this conversation. I am familiar with the SpeedSeall product as I have one on my Yanmar. I think it is 80%hype and 20% product because all it really is, is knurled thumb knobs

The Sherwood G702 pump fits the Onan but its not the same construction. The Sherwood G702 is a one piece casting, doesn't have an external plate that could be used with the Speed Seal

Thanks Bill, Jose and Leo, thanks for the advise. Highly appreciated. I've replaced all relays (have four of them all linked to each other) but the fans are still not working. It clearly seems a

All you have to do is purchase some brass thumb screws Like these and modify the cover plate. No need for a speed seal. http://www.mcmaster.com/#thumb-screws/=vx9we7 knurled head thumbscrew with

Hello Gang, I’ve used Speed Seal for years on my previous Volvo powered (TDM22) and have nothing but excellent results. Failure free to 500 hours.. always. One already fitted in Eleuthera main

Hi Bill, The sea water pump is made by Sherwood and its model number is G702. You find it in Island Water World catalouge under pumps. Its specified to fit Onan models from 6.5 to 10 kw. I got one of

I want to buy a Speed Seal impeller cover for my Onan 6.5 MDKDP genset from 1995. This impeller cover is sold by a UK company. It's a replacement cover that uses knurled knobs to remove the cover

Hi Colin, If you are near your boat , could you send me a few photos of the Starboard winch motor and gearbox? It is in the overhead above the midships berth. Fair Winds Eric Kimberlite Amel

Thanks Eric