Yes Eric, double yuk...moving to a mooring in bayside for the summer.

Hi Derick. The lower part of the CDrive (I'll call it the "foot") is actually mostly composite, with embedded metal (I don't know if it is aluminum or steel) where the 90 degree gear is that goes from

Kent, In thinking about your current task, I have been studying the diagram in the Files section that shows how to disassemble/assemble the C-drive. Among the things that are not clear to me is

Sage advice, Jim. I doubt you will have a problem. It is almost certain that my problem was caused by a combination of very poorly installed charger/inverter by a marine electrician and improperly

Kent, I have been following your saga and am wishing you the best. Thank you for keeping us all in the loop. Others be advised: When I had the generator on SM384 serviced at Amel Caraibes/Martinique

Painting white this vinyl ceiling will add a lot of light in the SM2000 Amel changed the vinyl color to white in the latest SM generation (red line) and of course in the 55 and 64. Has anyone done

Is this installed instead of the dish washer? Or where is it? /Annsofie S/Y Lady Annila SM 232 Skickat från min iPad 7 apr 2015 kl. 16:10 skrev "rossidesigngroup@... [amelyachtowners]"

Hi Bob, SKF and other Rotary Shaft Seal (Lip Seal) makers offer an optional Stainless Steel Garter Spring that one definitely wants to specify. The standard seals are supplied with carbon steel

Another one of those things that I loveabout Amels Yesterday, I tried to help someone with a refrigerationproblem on a BIG name brand yacht. I was unable to get to the Danfoss compressorcontroller

Thankyou looks very good, will se comming winter if I make similar installation

Hi Bill,Did not have the presence of mind to ask Maud how many went out--but mine was sent to me in February, 2014. I'm thinking that another owner must have installed on already. I'd be interested

Oh yuck--- Where are you heading from there? Fair Winds Eric Kimberlite Amel Super Maramu #376

Eric, At the worlds fair marina in beautiful flushing nyc. Ross

Vic I had my motor repaired by a motor repair shop also. They said the adhesive on some of the magnets failed and they re glued them. All has been fine since. I think I remember the motor being a

Hi Bob, Could you post a few photos of the fridge from a distance so I can see how it looks . Do you happen to have the name of the fridge maker and model number? Fair Winds Eric Kimberlite Amel

Ross, Where is your boat located? Fair Winds Eric Kimberlite Amel Super Maramu #376

I have the same motor but there is no label in mine either. I have had mine serviced at a motor/ starter shop in the past and have been able to keep it running. Mine also has some rust on the

Hi Paul, Sorry for the delay. I don't know for sure but I do not see the top loading fridge on the original Amel inventory. However, it seems very well integrated. You can see most of the following

Ha! Just as I thought. But, I guess they failed one part of the test which was to include you in the loop. Now that you are in the loop, all of us can be too. Keep us posted. Bill Rouse BeBe Amel

Thank You Jean-Pierre, I will do that. Best regards Vic On Tuesday, April 7, 2015 10:46 AM, "Germain Jean-Pierre jgermain@... [amelyachtowners]" wrote: Hello Vic, I