Bill, Gear box fluid, transmission nuts and bolts at the coupler, engine bolts where they fit to the angle iron frame and the engine mounts themselves,all need checked. The G5 prop is not normal

Hello! tried to answer yesterday from my phone, but it disappeared in the cyber space, try again the model is called SCUBA BOX water proof box from kis.it 78x40x35 cm, retail in Sweden around 20

My boat (Inuit) is anchored in Le Marigot Charles On 23/04/2015 18:04, "sailormon kimberlite@... [amelyachtowners]" <amelyachtowners@...> wrote:

As reel halyard winches and wire halyards are antique technology, fairly dangerous to operate ( especially by anyone unfamiliar with the tendency they have to remove teeth ) replacement with a

Similar boat (LOL)...I've also received advice to replace but hesitant. Has anyone done this on a Maramu or Sharki (mine is a 82 Maramu). Best, Jer

I'm guessing fouled prop, Bill. Did they try running in reverse? Can someone dive on the prop? Kent SM243 Kristy

Bill, One more thing. I am fairly sure that AutoProp is undersized for that engine. At some point that boat was repowered. An AutoProp H6 would be appropriate for a 110hp engine. I have known

Thanks for the response I really appreciate it and keep it coming from the others. I think that there might be some communication difficulties right now considering I am in Boston and the captain and

To Echo Bill's comment, I had some "light" vibrations, could feel in some RPM range. When I did the haul out, antifouling, C drive service, had the propeller entirely rebuilt and now the vibrations

Bill, I should also have said that it could be the AutoProp if the hydraulic shaft brake is not working or not installed. That would allow the prop to spin with the motor off and result in

Bill, You state, " With engine off in neutral it shakes the Amel drive." I assume you also mean under sail and the propeller spinning? However, every Amel I have seen has a hydraulic shaft brake that

Hi there New owner of a 1997 Amel Super Maramu in transite for delivery from Marmaris, Turkey to Boston, MA. Recently the boat has picked up a bad vibration in the prop shaft that shakes the entire

Hi all Super Malamud no 39 problem that bow thruster hasower but can't get it to go down just hearing humming sound from motor Any advice elf be good Thanks Barb

on my 1980 Sharki there is the original wire halyard for the main sail. All my advice has been to replace it with rope halyard. However being an Amel and reading the forum's advice not to alter the

Charles, Where is your boat? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Andy At the moment I am very busy leaving Sunny Side on a yard still end of the year. There are a lot of detail on the subject, and my English is quite poor, so I need a lot of time to give you a

Hi Gabriele, Thanks for your posts on the diesel tank leak. I would appreciate if you could forward me more information on how you removed the tank and repaired the leaking welded seam (s) Thank you

Glad I could Help Paul, Out of curiosity who is the maker of the water proof boxes? Sincerely, Alexandre --------------------------------------------

Erci, Thanks again. I plan to be in Saint Martin on 6 May, departing 10 May or so for the crossing. Charles On 23/04/2015 08:47, "sailormon kimberlite@... [amelyachtowners]" <amelyachtowners@...>

Thank you Alexandre, It was under the floorboard i had planed to use the different boxes, then I found the low cost heavy duty water proof boxes that I thought would fit well into the cockpit looker,