|
Isolation Transformer on an AMEL 54
Does anybody have experience with an Isolation Transformer on an AMEL 54?
Do`s, Dont`s, weight, power, location to install......
Shore power killed a couple of electronic devices in the last
Does anybody have experience with an Isolation Transformer on an AMEL 54?
Do`s, Dont`s, weight, power, location to install......
Shore power killed a couple of electronic devices in the last
|
By
luvkante
·
#21121
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
I think we are probably close to 20 tonnes judging by the position of the waterline, which is original, under water for the last 5m towards the stern.
Friends with a 54 told us that on the haulout
I think we are probably close to 20 tonnes judging by the position of the waterline, which is original, under water for the last 5m towards the stern.
Friends with a 54 told us that on the haulout
|
By
Alan Leslie
·
#21120
·
|
|
Re: FW: refrigerator/freezer access
Ann-Sofie & Jonas,
Could you please provide me with the information of the parts you used to upgrade your freezer and where you bought them?
Ipanema SM2K 278
Constitution Marina
Boston, USA
Not
Ann-Sofie & Jonas,
Could you please provide me with the information of the parts you used to upgrade your freezer and where you bought them?
Ipanema SM2K 278
Constitution Marina
Boston, USA
Not
|
By
Jose Venegas
·
#21119
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
We haven't weight ours properly, but the crane in Gilleleje, Denmark which was for 18 tons could only lift us without diesel, water, beer (!), dinghy outboard etc.
Take your stuff aboard now, after a
We haven't weight ours properly, but the crane in Gilleleje, Denmark which was for 18 tons could only lift us without diesel, water, beer (!), dinghy outboard etc.
Take your stuff aboard now, after a
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#21118
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
We reduced the “useless clutter” to a minimum for the boat. In fact, this was our starting point and we filled 3 large commercial bins when we took delivery of the boat last summer. We continued
We reduced the “useless clutter” to a minimum for the boat. In fact, this was our starting point and we filled 3 large commercial bins when we took delivery of the boat last summer. We continued
|
By
Germain Jean-Pierre <jgermain@...>
·
#21117
·
|
|
Re: [Amel Yacht Owners] sailing downwind with a parachute
Hello Ofer,
Still in Turkey?
I have an opinion supported by various languages defining this “thing” as either a Rube Goldberg in USA
A Kleuwmeldinge in Dutch
Or a “patente à gosse” in French
Hello Ofer,
Still in Turkey?
I have an opinion supported by various languages defining this “thing” as either a Rube Goldberg in USA
A Kleuwmeldinge in Dutch
Or a “patente à gosse” in French
|
By
Germain Jean-Pierre <jgermain@...>
·
#21116
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
Thank you all
20 ton loaded sounds to my experience more reasonable, and I agree it's easy to overload. We are currently clearing off all our belongings after have sold our house. We have lived
Thank you all
20 ton loaded sounds to my experience more reasonable, and I agree it's easy to overload. We are currently clearing off all our belongings after have sold our house. We have lived
|
By
Paul Osterberg
·
#21115
·
|
|
sailing downwind with a parachute
Hi to all.
Please see the link:
http://www.parachuteshop.com/sailing_downwind_parachut1.htm
Did anyone try it with an Amel?
Ofer Magen
Alba
A54 #160
Hi to all.
Please see the link:
http://www.parachuteshop.com/sailing_downwind_parachut1.htm
Did anyone try it with an Amel?
Ofer Magen
Alba
A54 #160
|
By
ofer magen
·
#21114
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
Dear Paul,.
19.6 tons.wet,fully equipped for ocean crossing. The folklore is, had you purchased an early one, The Captain only sold them by weight, so you would have been sure to
Dear Paul,.
19.6 tons.wet,fully equipped for ocean crossing. The folklore is, had you purchased an early one, The Captain only sold them by weight, so you would have been sure to
|
By
seafeverofcuan@...
·
#21113
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
Good evening Paul,
the last SMs (2000, from 2005) were weighted 15.3 tons empty (light displacement) which means without water, fuel and optionnal equipments (watermaker, extra batteries and charger,
Good evening Paul,
the last SMs (2000, from 2005) were weighted 15.3 tons empty (light displacement) which means without water, fuel and optionnal equipments (watermaker, extra batteries and charger,
|
By
Olivier Beaute
·
#21112
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
Kristy was 20 tons loaded when hauled in Trinidad a few years ago.
Kent
SM243
Kristy was 20 tons loaded when hauled in Trinidad a few years ago.
Kent
SM243
|
By
Kent Robertson
·
#21111
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
He paul and Judy
In oktober when Balu is in the kran i konw it ture
Elja
Balu 222
He paul and Judy
In oktober when Balu is in the kran i konw it ture
Elja
Balu 222
|
By
eljaroellinghoff@...
·
#21110
·
|
|
Re: [Amel Yacht Owners] Weight/displacement
Paul,
Usually skinny girls are better.
Don't fall for the weight is everything trap.
Bill
BeBe 387
Paul,
Usually skinny girls are better.
Don't fall for the weight is everything trap.
Bill
BeBe 387
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#21109
·
|
|
Weight/displacement
I’m wonderif someone has weighted an Amel Super Maramu when putting it on hard standingor similar? According to the Amel brochure the weight is 14 ton “empty” and 16ton loaded. To me this looks
I’m wonderif someone has weighted an Amel Super Maramu when putting it on hard standingor similar? According to the Amel brochure the weight is 14 ton “empty” and 16ton loaded. To me this looks
|
By
Paul Osterberg
·
#21108
·
|
|
Re: Original Rotary Drive with New Autopilot
Craig,
I expect Andy is referring to the NECO drive from the Maramu so your Raymarine is probably a lot simpler to connect.
Andy,
I have thought about the same change but the NECO is
Craig,
I expect Andy is referring to the NECO drive from the Maramu so your Raymarine is probably a lot simpler to connect.
Andy,
I have thought about the same change but the NECO is
|
By
jjjk12s@...
·
#21107
·
|
|
Re: [Amel Yacht Owners] Eumenia Mini 5500 Dishwasher Parts
Hi Leo,
If you go to https://groups.yahoo.com/neo/groups/amelyachtowners/files/EUMENIA/ and download ET_GS 5005_5500.pdf, (Eudora Soba Geschirrspuler 5005/5500), you'll find on Seite 4 and Seite 5
Hi Leo,
If you go to https://groups.yahoo.com/neo/groups/amelyachtowners/files/EUMENIA/ and download ET_GS 5005_5500.pdf, (Eudora Soba Geschirrspuler 5005/5500), you'll find on Seite 4 and Seite 5
|
By
svsummerlove@...
·
#21106
·
|
|
Re: [Amel Yacht Owners] Anchor Wash Pump Capacity
Hi Steve,
My problem was the PO had removed the anchor wash pump; I knew this when I bought the boat. I tried to procure a pump to no avail. Then as we plan a circumnavigation and my take was to
Hi Steve,
My problem was the PO had removed the anchor wash pump; I knew this when I bought the boat. I tried to procure a pump to no avail. Then as we plan a circumnavigation and my take was to
|
By
Germain Jean-Pierre <jgermain@...>
·
#21105
·
|
|
Re: [Amel Yacht Owners] Eumenia Mini 5500 Dishwasher Parts
Hi Steve,
I cannot find part 034015 on the website. Can you confirm that the part you are looking for is the program timer.
Since there is a holiday in Austria today i cannot contact them before
Hi Steve,
I cannot find part 034015 on the website. Can you confirm that the part you are looking for is the program timer.
Since there is a holiday in Austria today i cannot contact them before
|
By
Leopold Hauer
·
#21104
·
|
|
Re: [Amel Yacht Owners] Anchor Wash Pump Capacity
Hi Jean-Pierre,
Now that's an excellent idea. It would have the added advantage of washing salt water off the chain too. I'm presuming all that would be required is a check valve into the existing
Hi Jean-Pierre,
Now that's an excellent idea. It would have the added advantage of washing salt water off the chain too. I'm presuming all that would be required is a check valve into the existing
|
By
svsummerlove@...
·
#21103
·
|
|
Re: [Amel Yacht Owners] Anchor Wash Pump Capacity
Hi Steve,
I had the same problem and solved it by piping a fresh water line directly to the anchor wash nozzle. Use the normal fresh water pump.
Also took the opportunity to add a “fresh
Hi Steve,
I had the same problem and solved it by piping a fresh water line directly to the anchor wash nozzle. Use the normal fresh water pump.
Also took the opportunity to add a “fresh
|
By
Germain Jean-Pierre <jgermain@...>
·
#21102
·
|