Hi Leo, If you go to https://groups.yahoo.com/neo/groups/amelyachtowners/files/EUMENIA/ and download ET_GS 5005_5500.pdf, (Eudora Soba Geschirrspuler 5005/5500), you'll find on Seite 4 and Seite 5

Hi Steve, My problem was the PO had removed the anchor wash pump; I knew this when I bought the boat. I tried to procure a pump to no avail. Then as we plan a circumnavigation and my take was to

Hi Steve, I cannot find part 034015 on the website. Can you confirm that the part you are looking for is the program timer. Since there is a holiday in Austria today i cannot contact them before

Hi Jean-Pierre, Now that's an excellent idea. It would have the added advantage of washing salt water off the chain too. I'm presuming all that would be required is a check valve into the existing

Hi Steve, I had the same problem and solved it by piping a fresh water line directly to the anchor wash nozzle. Use the normal fresh water pump. Also took the opportunity to add a “fresh

Hi Bill, Yes, I agree, it's a great pump, although mine too has had a chronic leaking problem since new. Unfortunately, due to not being used for several years, it has seized up from its own leaks.

Hi Andy, I'm about to install the AC42N using a Raymarine Type II 12v drive - (same as the original). Your post suggests that won't work, although B&G's US system's engineer did the specs for my

Leo, Thank you for your kind offer to contact them on my behalf. Even if they no longer sell the part, but can provide another source that does sell that Eaton product would be very helpful. This is

Jean Luck, Me too! I would be interested also. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +39 333 121 8115 Italy Mobile +1832-380-4970 USA Voice Mail On May 1, 2015 2:52 PM, "svsummerlove@...

Hi Bill, Thanks for your response, and thanks even more for all of the docs and photos you have uploaded over the years. I followed them faithfully to remove the dishwasher, troubleshoot the problem,

Jean-Luc, Thank you for your response. Yes, I'm very interested in what you have designed. Please let me know when you have finished your tests. Steve Constantine s/v Summer Love SMM #340

Hi Steve, Do you want me to call Schabauer? We are in Austria - no problem for us to establish communication between them and you! Regards, Leo SM 69 Yin Yang Von meinem iPad gesendet Am 01.05.2015

Steve, it is a really good pump and Amel had/has rebuild kits. A contact for the pump manufacture is F.E.I.T Pompe feitpompe"at"libero.it The pump does not have a pressure cut off switch, so if the

I ordered Part #031508 Heizkörper 240V 2000W Mini which is the heating element part for the dishwasher. From: ersatzteile"at"schabauer-service.at Mit freundlichen Grüssen Gerhard

Steve, this winter I trey to change the timer and some other parts. After calling Amel, factory etc . . . NO Parts are available ! EUMEA in Australia confirm me that no parts are available and

Does anyone know where to buy parts for the Eumenia Mini 5500 dishwashers? I've bought parts in the past from this email address in Austria (ersatzteile@...), but I've made several attempts to

Does anyone know the GPM flow capacity and psi ratings for the anchor wash pump on an SM? The capacity plate info on mine is no longer legible. I'm trying to replace it, and want to make sure to do

Hi Charles, thanks for your feedback. We installed a B&G system using Triton and Zeus range. We choose the Triton Pilot controller computer with the High current add on pack ( AC42N computer) - we had

Bill, if you look up"replacing rubber bushes in vetus unit on engine output shaft" posted by Eutikia on Thursday 5th April 2012 you will see an attached posting from Danny on Ocean Pearl. Danny has

Yes, and thank you for teaching this new guy a lesson ! HAHA On Tuesday, April 28, 2015 9:17 PM, "Kent Robertson karkauai@... [amelyachtowners]" wrote: Hi William.