Well, I see that the pasted in diagram did not transmit through yahoogroups. Sorry about that. I guess the words will have to do. Mike Ondra From:

On Hull #240 the 30 amp genset breaker is on the aft end of the Onan Control Panel as shown in the diagram from the service manual. Mike Ondra S/V Aletes SM#240 From:

Kent, I think on our model, it is located ont he 24 volt panel. I also looked and didn't find anything... But yes would love to see a picture too! Sincerely, Alexandre SM2K #289 NIKIMAT Grand

Can someone take a pic that shows where this breaker is? Either I'm blind or I don't have one. Kent SM 243 Kristy

Good morning Jim, Thanks for the update and most importantly to glad it was not due to a problem! Sincerely, Alexandre --------------------------------------------

Alexandre, Bill, Mike, Andrew and Mr. Olivier BEAUTE,Problem solved, thanks to each of you. Indeed Alexandre, it was the breaker on the aft end ofthe generator which tripped due to (my) user error

Use imron paint and pinstripe tool. Rolls on easily. Bali Hai SN24 Annapolis Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802 On May 28, 2015, at 5:14 PM, Stephanie

My summer project is to paint the brown stripes on the deck. We have SM hull 353. Can someone recommend the best paint to buy for this tedious project? Many thanks and Fair Winds! Stephanie

I got the form letter and an explanation. The explanation said that they were no longer doing auto-renew policies and gave me a list of three different insured crusing areas to select from for them

Good evening Jim, once you have checked the AC breaker on the genset electric box (towards the aft of the boat), if it has not tripped, check if the blower above the generator is running. This is the

Mike, Did your main breaker on the side of the Onan trip also? My experience is that it can open if more than 30 amps of 230VAC are being used. That would be the water maker, 3 A/C units, and 100amp

That has happened to me when I turned too many things on too quickly. Andrew SM472 On 28 May 2015, at 20:14, 'Mike Ondra' mdondra@... [amelyachtowners] <amelyachtowners@...> wrote:

Agreed, but important to understand why that breaker may have tripped. Mike Aletes SM#240

Jim, Alexandre's suggestion is probably what your problem is. Let us know. Bill BeBe 387 Malta On Thu, May 28, 2015 at 7:43 PM, Alexandre Uster von Baar uster@... [amelyachtowners]

Hello Jim, You should check the other switch which is on the side of the generator (meaning on the aft side of the boat). Trying to be clearer, when you have the “DC circuit breakers” in front of

ON SM 384 with Onan MDKAV running and powering the boat, all AC power went off but generator kept running.The "DC circuit breakers" and "Emergency Stop" swithches on the generator itself are on and I

Hi Tony, Did you ever get a solution to your search for a supply of lower cost blue led panel illumination for your 54?I have the same problem. Regards, Rob AMEL 54 No 120 "Cléo"

We used Sikaflex to "glue" them in place. And yes the plates are mounted vertically, no curvation then. When the Sikaflex had dried, we could thighten the screws. The plate and bolts are made in

I got the response back from Amel about fixing the pressure water lines under the cabin sole. The break seems to be near freezer compartment about the center of the boat. I can hear the water running

Thanks Peter, That was it!! I need to do a complete survey of them all. Cheers Chris Hemera SM031