Good morning Tom, On SM2K #289 NIKIMAT it is at the U seat in the salon. More precisely near the air conditioning vent (Port side - near the forward wall) There is a triangle piece of wood, with a

I am installing a new Raymarine auto helm system. I need to replace the fluxgate with the new EV-1 sensor. Does anyone know the location of the fluxgate? Thanks! Tom Peacock Aletes SM2K 243

HI BILL, I thought SM2K’s had Klimma AC units? I accepted Riza’s suggestion that Webasto was a better choice for out refit… I can state that our Webasto is doing great in 95F temps with 100%

If you are looking for a replacement or a spare, here is something perfect, I think. I bought one as a spare. March pump AC-5C-MD 230v 1020 gph Replacement pump for Cruisair PMA1000C

Hi Bill, You may recall I experimented with these on the ONAN and they didn't last any longer than the stock impellers. I even changed the 2-piece ONAN pump housing for one piece Sherwood pump - no

A little over a year ago, many of us were discussing Globe "run dry impellers." I swallowed the hook and I bought 2 each for the Yanmar and Onan. I installed the first Globe in the Yanmar on April 20,

BTW, we replaced membranes 2 years ago and made water a few days ago with a TDS of 108. I think that there is a correlation between flushing out all salt water and flushing frequently and high quality

Great Idea Bill. Fair Winds Eric

Just as a passing remark on this thread, I found it incredibly easy to use a 24VDC lawn sprinkler valve, a 24VDC digital timer, and a carbon filter/housing to install and automatic flush in-line on

Bon jour, JP, merci. CC is interesting, but I'm not ready to take that leap yet as I plan to do the vast majority of my sailing in tropical climes. I'll look at it all again when this paint is ready

Hi Keith, can't help you with the pressure issues but the rotten egg smell happens when salt water is left in pipes. I get the same in my salt water deck wash and in the heads if they are left too

Hi Kent, Boat is in Turkey, Goček, finishing a long refit. Water temp was moderate until 2 1/2 weeks ago. Now at 29-31C. Previous boat was based in Majorca ... Some tropics and some moderate temps.

Where were you Jean Pierre? Cool water or Tropics? Kent

Got it that time Bill. I remember seeing it when you first posted it. Pretty impressive difference. Thinking I'll probly go with Island44 next time and buy enuf to paint again in 4 years unless

Hi Kent, I have Coppercoat and the boat has been in the water since April. She had to come out for repair last week and she had a Clean bottom. No green fuzz, no barnacles. Got precisely 8 knots at

https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/643381218/lightbox/861810734?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/861810734 Here is another, but you probably have to be

Hmm. That link wouldn't open on my iPhone. I'll try it again on my laptop. If next time I decide to paint with something not available here, I'll probably be somewhere outside the U.S. and EPA

Kent, You might want to add this photo to your coppercoat research folder: https://groups.yahoo.com/neo/groups/amelyachtowners/search/photos?query=coppercoat#zax/albums_643381218 I said that I

Keith, I do not think it is possible for "no" pressure to build and reflect on the gauge when turning the valve, unless the system has a "dump" valve for poor quality...and I do not yours has

Hi Bill. I don't mind doing it in warm water, but not cold. I'm looking at making my own Hookah system for cleaning the bottom, unfouling the prop, changing zincs, maybe enuf hose to unfoul an