Hi Eric, There wasn't anything sealing the top of the bolt on Kristy. It was exposed and looked to be in fine shape. Makes me wonder if the CDrive had been removed before I bought her. I put some

Hi, I hauled Kimberlite today to fix some water intrusion in the C-Drive. After reading what you had done and some of Olivier’s explanation as to what was hiding under that black silicone button

Hi All The answer to my problem turned out to be the high pressure switch which had defaulted. We can operate the system on 24v for the present until I can get a replacement part. Kind regards

Thank you Olivier for the recommendation to have the solenoid on the transfer switch checked. We'll do this on Monday. Having said that, on advice from an experienced friend, we try and avoid using

Duane / Bill This is what Dow say about Filmtec membranes and chlorine... The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Thefree chlorine tolerance of the membrane

Duane, You're an engineer. What does that quoted instruction tell you? It tells me nothing. What is the definition of "pay attention" and "too high?" Also membranes for saltwater are different than

Chlorine kills RO membranes...period. NEVER allow water containing chlorine in the watermaker....good idea to have an activated carbon filter before the membranes in the case that you may have put

The filters will probably manage the chlorine, but the membranes doesn't. It is enough to flush the system with land water containing chlorine to destroy them. /Annsofie S/Y Lady Annila, Sm

In regard to chlorine, my Owners Manual seems to allow the chlorine level in potable water: " Payattention not to allow pure chlorine (or a too high dose of chlorine) in the the

With regard to Bill's results: We purchased a Globe or two as spares but had a Yanmar impeller installed since our last replacement in January 2014. When earlier this year the Yanmar specialist

Heh. If we were in the U.S. we would purchase this tonight. Just three months ago we had the CALPEDA rebuilt by Southern Armature and Pump Company in Fort Lauderdale... for $406 or so. They know the

I purchased mine from Amel back in January as well and fit them today. Easy job. The old ones had crumbled almost completely. Lewmar SZ1 Simple End Stop Part No. 29171040 –for Super Maramu mizzen

Keith, For some reason my reply to you was broken in half by something. I will try again. Keith, Maybe I misunderstood your earlier email where you said, "...water is pumped through the system and out

Keith, Maybe I misunderstood your earlier email where you said, "...water is pumped through the system and out through the hull..." The pressure valve is designed to increase pressure to the outside

Thanks Bill (and Danny) for the responses to my questions. Maybe the pressure valve is faulty - but I'm not sure that would explain the lack of water emerging from anywhere, pump running. It must

Duane, I purchased a March AC5-C-MD, 1000GPH, 230v 50/60Hz I bought this one from this seller on ebay:

Derrick, All good questions, most of which I will answer in a day or two with photos, etc. With the Amel-installed rinsing lever off, my 24V timer still opens the 24V valve for 6 minutes on Wednesday

Frederic, Glad to see you had a successful voyage! I am the guy with the Pao San, the other SM in Summit North Marina. I met you right before your trip a couple years ago. Could you give me a

LC-3CP-MD 230VAC 510 GPH Cheers Alan Elyse SM437

Bill, I forgot to ask - what size pipe (0.5", 0.75", 1"?) is that Amel-installed rinsing lever and what threads? BST? NPS? Metric? Derick SM2k #400 Brava Currently on the hard in Antigua