Hi All, I was away last week and heard that someone tried to get a mooring at The Huntington yacht club. I do not know if they were OCC, Tartan Group members, Amel group members, or just cruising

amelyachtowners@... Dear all, I would like to thank Ian Shepherd for mentioning my « ABSURD SUGGESTION » concerning DESSALATOR. On one hand, it is only facts and facts are stubborn:

Dear Anne and John, Thanks a lot for that.I have been quoted a reasonable price cif Montevideo. My only problem now is to get the darn thing out of Uruguay without incurring their inport duty (20%)

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkRev.doc Uploaded by :

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkSystem.doc Uploaded

Does anyone know the code to enable lower sideband on a Furuno 1503? Judy Rouse SM Hull 387

I manually moved your photo to your album. Don't know why you aren't allowed !?! Richard <hollamby@...> wrote: it find right.

We have tried to post this pic but for reasons known only to Yahoo it has gone into the album of pics entitled Aletes SM 240.We cannot find out how to delete it from there and at any event when we

<sailingjudy@...> wrote: The of Hi, I have SM 407 of May 2003 and had last year the same problem. Amel at Hyeres took the mahine out and got it repaired. It was a little problem in the elecronics.

Hello Ian and Judy, Sorry for my delay in replying but I have been away. My dinghy is a Southern Pacific Shearwater 310 and it is great. It is now five years old and looks like new despite the fact

The dryer in the SM 2000 is not vented. Heat is created by evaporation/condensation of fresh water. You will use 20 gallons of water to get your clothes warm but not dry. The AMEL 54 has a vented

We have a 2003 model Super Maramu 2000, built November 2002. We strongly suspect that the clothes dryer is not vented correctly. The washing function works great, but the dryer leaves the clothes

Hi, Jimmy Cornell's "World Cruising Routes" would be high on my list. Obviously, you will need cruising guides and charts for every area you will visit. They will be easier to purchase in Europe,

Hi All, Within the group are many who have toured the world. I am preparing myself for this adventure, but I would appreciate if an expert could answer me following questions: 1. What books (almanac

Hi, We have decided to join the Amel Family and buy a Super Maramu 2000 year 2002-2004. Does anyone have one for sale or will be putting theirs up for sale in the near future at a realistic price? We

Vielen Dank Jochen, for your invaluable feedback. Yes, I'm aware that the M802 is not type approved in the EU, but as I'll be registering my boat outside the EU, hopefully that will not be a problem.

HiRoger, first of all I think the ICOM IC-M 802 is about the best of units you can get these days, however, it might be illegal for a non-ham to fit it - at least in germany it is not approved as a

Thanks for the reply, Ian and Judy. We did use the 15W40 because that was all we could locate near the boatyard. We also did replace the hard interior seal on the bowthruster when we replaced the

Dear all, I'm most probably going to be fitting an Icom M802 SSB, enabled for the Ham frequencies. SSB is fairly new to me so I wonder if some of you seasoned adventurers could give me some advice on

Erick, merci pour vos conseils. Je contacterai Bauer France quand Amel commence avec la construction de mon bateau en 2008. However, for the benefit of all the English speakers here, perhaps better if