Hi, I just finished installing this AIS "radar" unit on my boat and it works great. It only took 2 hours to install. I believe it is a very worthwhile investment Fair Winds, Eric Amel Super

Dear Yves: Thank you for being the first to bring to our attention the problems associated with the salinity sensor on the Dessalator water maker. Your post about the motor fire doesn't specify if

I have spent more than 40 hours drawing complete schematics and logic diagrams for the Dessalator water maker Control Board on my Amel SM 2000 , Hull # 335. I have verified that the salinity sensor

Hi, Can anybody help me. I hve had mooring rope in the thruster due too short mooring rope. Now cannot get bowthruster fully up ca 1,5 cm left. Not sure if get it fully down, but when I dive can move

9 June 2006 REGARDING POWER DRAW OF DESSALATOR 160 l/hr WATER MAKER I have verified that the power consumptions on my Dessalator Water Maker on my hull # 335 Amel SM 2000 are as follows: 1.

The shaft on the main sail furling motor on our SM 2000 fractured in such a way that the shaft remained partially engaged and would work while making a lot of noise. I originally thought that the

There seems to be no doubt that the dessalateur salinity detector is non functioning.A cheap and easy solution is to fit a simple TDS meter in the output line.Such a meter is sold by an American

Hi All, I was away last week and heard that someone tried to get a mooring at The Huntington yacht club. I do not know if they were OCC, Tartan Group members, Amel group members, or just cruising

amelyachtowners@... Dear all, I would like to thank Ian Shepherd for mentioning my « ABSURD SUGGESTION » concerning DESSALATOR. On one hand, it is only facts and facts are stubborn:

Dear Anne and John, Thanks a lot for that.I have been quoted a reasonable price cif Montevideo. My only problem now is to get the darn thing out of Uruguay without incurring their inport duty (20%)

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkRev.doc Uploaded by :

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkSystem.doc Uploaded

Does anyone know the code to enable lower sideband on a Furuno 1503? Judy Rouse SM Hull 387

I manually moved your photo to your album. Don't know why you aren't allowed !?! Richard <hollamby@...> wrote: it find right.

We have tried to post this pic but for reasons known only to Yahoo it has gone into the album of pics entitled Aletes SM 240.We cannot find out how to delete it from there and at any event when we

<sailingjudy@...> wrote: The of Hi, I have SM 407 of May 2003 and had last year the same problem. Amel at Hyeres took the mahine out and got it repaired. It was a little problem in the elecronics.

Hello Ian and Judy, Sorry for my delay in replying but I have been away. My dinghy is a Southern Pacific Shearwater 310 and it is great. It is now five years old and looks like new despite the fact

The dryer in the SM 2000 is not vented. Heat is created by evaporation/condensation of fresh water. You will use 20 gallons of water to get your clothes warm but not dry. The AMEL 54 has a vented

We have a 2003 model Super Maramu 2000, built November 2002. We strongly suspect that the clothes dryer is not vented correctly. The washing function works great, but the dryer leaves the clothes

Hi, Jimmy Cornell's "World Cruising Routes" would be high on my list. Obviously, you will need cruising guides and charts for every area you will visit. They will be easier to purchase in Europe,