Jean-Pierre I would be most appreciative if you could take some photos of the davit cross brace bars of how they attached both ends. I am keen to see the angles and how these attach at both ends to

Jean-Pierre Thanks for responding. I will try to turn it out then instead of pulling. Cheers Colin - sm#332 On Fri, Oct 2, 2015 at 3:35 PM, Germain Jean-Pierre jgermain@... [amelyachtowners]

We have a Carib CX8 that is 285 cm long, I guess that will be around 8ft6in. We have it on the roof of the aft cabin with a slide that we, very simply, attach over the stern, use the electrical winch

Hi Jer, I have the EMEK marine gantry/davits on my boat. The design was modified somewhat to include twin lateral braces based at the aft central candle on the stern and going diagonally to the

Duane, I cannot confirm from direct experience with the D60, but maybe I can help. Today, there is no maker of membranes other than Filmtec. Filmtec makes some other OEM brands, but Filmtec makes them

I believe that there are few davits that are strong enough and stable enough to support your dinghy while sailing. Maybe Simpson Davits, but they will cost more than you want to pay...and I am not

Hi Colin, My drain plug leaked too and I had to change it. This was during the refit in Turkey. Mine was screwed in… Cheers, Jean-Pierre Germain, SY Eleuthera, Amel Super Maramu 007

Until I have finished running all new cables to the top of the new davits, and then sealed the cable access hole at the top of the stainless davits, we continue to get a menacing trickle of water into

I apologize for my short comment earlier. I think the sloop is an error but the ketch is a balanced and solid Amel vessel. I’ve seen some fine examples! Jean-Pierre Germain, SY Eleuthera, Amel

Use passageweather.com with my Iridium phone and it's compressed files download in a few minutes. If I get a 3-day forecast it costs about $7 U.S. in air time. Kent SM243 Kristy

Mark, The data comes compressed from Predict wind and has unlimited text and data in the plan. I can download all the weather data now for free on SSB, However you can receive their route analysis

I have not tried this specific combo. We are not big fans of data over Iridium (until they move to the new satellites, if ever). It is very slow. It may be better with compression software.

Hi, Does anyone have experience with the predictwind.com program for passage planning and the use of the Iridium Go phone? Fair Winds Eric Kimberlite Amel Super Maramu #376

Roy , I do not think there is a surveyor in Ny that knows Amels. However I have had dave do work for me in the past and he was very thorough. I have known him for about 20 years.

Elmer, The ketch is regarded as being a lttle more balanced than the sloop as the main mast is in the same position. Sloops can be a little cheaper and supposedly harder to sell but that may mean

Can anyone confirm that the replacement membranes for the Duo60 watermaker are FilmTec SW30-2521? The manual notes they are type 2521. I assume the 30 is the diameter,and the SW pertains to the

Thank you everyone for taking time to respond. Can anyone tell how the hulls are constructed? Are the solid glass or foam cored? I'd be interested in anyone's point of view on benefits and

Thank you everyone for taking time to respond ti my questions. Can someone tell me how the Amel hull were constructed (solid core/foam core etc.)? I'd also be interested in everyone's and anyone's

I have an Amel Santorin #84 (1993) “Sisila", now in Rhodes Marina, Greece, and I steered to it, rather than SM, because we planned (my wife and myself) cruising mostly in the Med, even if Santorin

Fellow Owners, I've decided to get a 8ft6in RIB for our trusty Cerulean and wanted to discuss the various options (from custom to premade + hybrid). Would like to keep the cost to a minimum