Hallo to all in the group, since a week now,I have the same problem: when testing the electricity leak to the minus ,the light goes ON. I would appreciate an advice ,what can it be and what is the

Jamie and Wolfgang, The 2500W and the 800W inverters are under the table. There is space enough. The environment is less challenging then in the engine room. Regards, Ofer Magen

32 amps. Jeff

Good to hear from you Craig. I know yours is a factory install and I always thought the arrangement you describe was the way Amel would have installed it. Trying to get a big inverter under the nav

Hi to all. I did not replace the 800W inverter. The 2500W inverter is installed facing the 800W inverter.it's bloking a beat the space. It is mounted on the back wall of the drawers under the

Hi Deb, we are at replacing / upgrading all the soft fabrics on the boat hull , side of aft berths saloon lockers etc. We have also used this material extensively on Landside applications. You might

Jamie, The 2500 watt inverter on Lone Star (now Last Tango) is on the port side in the engine room facing forward. When you look over the generator you see that inverter and then the 40amp and 100

Wolfgang, the more I look at my installation options in the nav station locker I am sure Ofer replaced the 800W inverter. I think Amel would have just installed the 2500W inverter and run bigger DC

Mark, I do not but I looked at the Victron BMV-700 Battery Monitor which does fit the same hole as the Link 10. I like its specs, Including monitoring 2 different batteries, but noted that it does

The BattMan Lite by Mastervolt looks to be the same as Xantrex LinkLITE Battery Monitor. Even the instructions are the same. Does anyone have any experience with this unit? With best

Ofer, do you now have 2 inverters under the nav station table? I have the small 800W inverter there now (powering my TV) and do not see how there would be room behind the door for the large 2500W

Bill I just saw the Mastervolt has new in programm a BattMan Pro - looks like the Link 10 Moniitor. May be the description - see download from the web - is better. Wolfgang SY Elise Amel 54 # 162

Hi Ofer, Did you replace your 800 Watt Inverter with the 2500 Watt inverter or did you add it with new and bigger cable to the batteries ? I was thinking to replace the 40 A charger to the combi

Hi Jamie, The 2500W inverter in my boat Alba -Amel 54 , is located under the navigation tabel. It was installed by Emek Marin. They also conected the micro wave to the inverter so that it can work

Christophe Do you have a Santorin? What is the number and where are you? Ric Bali Hai SN24 Annapolis

Mark, I installed a Link 10 on my last boat and found the manual confusing, I thought it was just me , glad to read that Bill found it confusing as well. A few years ago I installed a Victron meter.

Deb good morning, Yes changing the liner is hell. I used a good quality liner (no foam) on the ceiling, but instead of gluing it, we first installed thin strips of wood to the ceiling (using glue) in

Christophe My previous boat, a Jeanneau 37, had 10mm chain. When we bought our Santorin (twice the weight) it had 8 MM. chain. I asked the surveyor about its suitability. He checked some tables which

Mark, I have not looked at alternatives...I have just gotten accustomed to the POS Link10. ;) Bill

Yes, Go here: https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/911367118/lightbox/291529708?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/291529708 You remove the 2 bolts on the