Congrats on your purchase. We hope to see you out there one day. Regarding the rigging. This is big expense. We just replaced our 15 year old rigging this year. Our thought process being that if

Hi Eamonn Just to give some info on my experience with anchors and outboard engines this year in Sicily and Croatia. As to anchors, The CQR worked fine in the mud at Siracusa, Sicily and that was

Good afternoon Eamonn, First, congratulations for purchase a Super Maramu and welcome to the group! About what spare parts to have, it will depends of the type of sailing you plan on doing. If I

Thank you all for the responses. As an Amel owner for 5 years now, this forum has saved me tens of thousands of dollars and helped me understand these wonderful boats a bit better.

Hi I bought a SM this Spring and intend to set off for a few years when I retire early in a year. What essential jobs should be done while it is easy to get equipment and qualified installers, before

Gary, I know you looked at the brushes, but you may want to be sure that the electrical wires coming from the commutator brushes are intact. I recently had a broken one that exhibited as a sudden

Hi Gary: A little basic trouble shooting with a multimeter may save you some time and effort. Do be cautious working around the solenoids as they have large current carrying capacity and you can

Jeff, I have that tool. For the Amel the packing is so tight I was unable to remove any packing with it. Fair Winds Eric

Fair Winds Smooth Sailing To All Capt Richard RP Yacht Brokerage Newport RI We list sell and service fine yachts including Amel's Cell 603 767 5330

HI Gary There is a spare motor on board. Did you try to run the motor with no load before you took it apart? Are you getting power to the motor? If yes If the brushes are good then it's most likely

Hi Gary, Sorry you are having issues with the furler, but hopefully it will be an easy fix. If by chance find you have an issue with the gearbox, we carry a complete spare Leroy Somer gearbox, and

Great info Eric! Thanks. Sincerely, Alexandre --------------------------------------------

Thanks Mark, that's perfect. I'll get after that and once I get the unit off the day ck and into the cockpit I'll try the application of superior technical knowledge and motor skills necessary to

Hi Thomas, I would only add that turning a sixth of a turn (or two) will let you put the securing plate back to its previous location. The adjustment is not so accurate... Olivier

https://www.autowashonline.com/Customer/auwama/customerpages/specpages/3FRSvc.pdf For those of you who are interested in rebuilding your Cat 160 LPH pump. Fair Winds Eric Kimberlite Amel Super

Gary, I can help partially. To remove the motor take out the four bolts you loosened to slide it down (when operating manually). The gears will drop down from the furler and you can set the

As Bill mentioned a slight turn on the nut will stop your leak. I would have someone cut a short wrench for you out of aluminum plate. There is a photo on kimberlites section in the photos

Greetings and Happy Thanksgiving to all who celebrate it. We just completed passage to the BVIs from Hampton, VA. and while the passage was not uneventful, it worked out well for us and our crew.

Mike, When I cleaned out the chain locker a couple of years ago I don't remember anything looking amiss. I can open it up and take some pics for you if you want to see what a '89 one looks like. Hey,