Hello Gary, Merry Xmas and Happy New Year... to be shared with all members of this nice forum. Many congratulations for the new tentative forum. I just tested it by sending a post in "Current

Hi Donato This a very common occurance on the sm. Expensive fix...have new one made of heavier material Simple fix.straighten it Replace the clevis pin securing it with a bolt and nyloc nut. Do it

Hi, will appreciate receiving your opinions about a serious problem to our SM 2000 presently at Fort Lauderdale, Will try posting a picture that will explain the problem better than my words. The

Gary, Merry Christmas and thank you for doing all this great work. Having a workable web site is very valuable. I watched my boat being built 17 years ago and after about 50,000 miles I am

This is question is 9 years old, but here is what I found from Amel in French, based on EU calculations, but is is just a "specimen" report:

That's an interesting find. On the Panasonic site, the manufacturer states this mw oven includes "inverter" technology. Mind you, this has little to do with our boats' traditional inverters, I

Yes it does. I will post a picture in the photo section.

Does it fit in the original space? Jamie s/v Phantom

Just in case anyone out there is looking for a good 50/60Hz 220v microwave, I found one. The Panasonic NN-GD692S works perfectly here in the USA running on 60Hz. I bought it off Amazon UK. It did

Update for today: Merry Christmas! I get to sit around sipping egg nog and puttering about before guests arrive. Then we're looking at a great dinner and some family time. In the meantime I got to

Gary, You deserve all credit. I wasn't in favour of this at all, but after taking most of the day to understand how to access the site because I kept trying "networks" as opposed to net - some

Gary This is great. The project speaks of an enormous potential and ease to harness the accumulated knowledge that has been poured in by the members. I am all for it. I encourage the group to

OK, update. I have the photo gallery set to accept uploads from members. 2500x2500 resolution max. I may have to shrink that a little if I figure on 10,000 photos someday :) I haven't figured out

Very nice job Gary, and thanks for all the hard work. Steve Davis Aloha SM72 Fajardo, Puerto Rico

Have been on other forums that use this set-up and it usually works perfect! Thank you Gary for your hard work! We crossed The Atlantic to Europe in May 2015, if you want any info, please feel free

JP, I first cleaned my 100HP Yanmar at 2000 hours with Barnacle Buster, at 2500 hours I had it and the Onan cleaned again by "professionals" that led on to the transmission heat exchanger failing

JP, If you have a turbo charger, you probably will also have an after cooler in addition to the heat exchanger. Both should be cleaned. However, I think the recommendation from your mechanic to do

Thank you Gary. First blush; all looks well. I registered and it's nice that one can his / her profile. Clean simple and elegant; just like Henri would have done...

I cleaned my Yanmar (100hp Turbo) heat exchanger at about 2,000 hours because the temperature would rise at higher speeds. It was perfectly clean and did not need cleaning. Be sure that you have the

Kent, I think I just have to figure out what I did with the permissions on the individual categories. I may have set the whole category to read only instead of just the message. Yep, there's a lot