Hi Gary, Thanks again for all the time and effort on the new site. If we were to download the whole database, will it be possible to search it off line? That would be a huge asset if we were to be

The link is: www dot amelowners dot net click here: http://www.amelowners.net Gary W SM 209 Adagio USVI

Our lift knob for the furler locking pin has disappeared. Anyone know of a source? Mike O Aletes SM#240 Red Hook USVI Sent from my Verizon Wireless 4G LTE DROID "peacock@... [amelyachtowners]"

Yes thanks Sent from Samsung Mobile

Hi Eric, I agree…. Gary has done a terrific job protecting a “heritage” endangered by Yahoo intentions. We will be far better served with the new site rather than the uncertain future at

Gary, Thank you for your incredible work for all of us. What is the link to our new website? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Olivier, many thanks for infos. Waiting to arrive at an Amel base, as I'm now in Thailand, may I add some how grease from the top ? All the best Giovanni Testa sv Eutikia SM2k 428

Hi Mark, the purpose of the grease is to reduce friction (and wear) between the inner tube of the foil and the forestay. AMEL's recommendation was to renew the grease after 5 years, but very often,

Gary Again, thanks for all your hard work. Impressive. Mike Neale CYC Marina del Rey, CA 818.371.2300 c

Eric, The Yahoo Database is not directly transferable to the any other kind of Forum or BBS. What I have done is to capture the messages (all 25,000+ of them) and create both .PDF and .html

I will be re-rigging my Super Maramu in April and will re-grease the jib forestay at that time. Is "Super Lube" the best product for this task? What does Amel use on new boats? Suggestions are

Dear Gary, Do you think you should also have a location on the new site that has the exact format as on yahoo- with all the posts listed in date order? Fair Winds Eric Kimberlite Amel Super

Danny, Yes, everything will stay just as it is; I am not messing with the Yahoo site at all, just providing an alternative that should be a significant improvement. Until Yahoo shuts the boards down

Hi Gary. When you go live will the yahoo group still be functional along with all its files? Regards Danny 299 Ocean pearl Sent from Samsung Mobile

Good evening David, No the keel bolts don't need to be tightened periodically. The main reason why you would need such a cure is after a severe grounding. Then, it is a lot of work and you would

...and, also, the O ring inside the bronze-wearing-out-bearing. Total: 3 shaft seals and 2 O Rings Cheers, Craig - SN#68 Sangaris ---In amelyachtowners@..., <kimberlite@...> wrote : Hi, Also remember

Thank Joel, Appreciate the thought and guidance. Aras

Olivier, Joel, and others, Do keel bolts need to be tightened periodically? Seems sensible to do so. I have slight separation of my iron weight portion of my keel from the fiberglass portion of

I do have experience with both motors, and I can assure you the standard Hitachi is NOT the same as the cheaper one from China with a diffferent paint job. I have held these two side by side in my

Just attach both heads of both headsails to the swivel and hoist. You can then furl the double headsail rig infinitely without wrapping the spinnaker/second halyard around the swivel and headfoil.