Good morning, Recently I noted my genset would shut down by itself. Under what I thought was not full load. I thought I remember being able to run all 3 Air Conditioning, 1 battery charger and the

Good morning, Thanks for your info Mike. Not sure we have the same genset, on SM2K #289 I own Genset ONAN MDKAL Is your spare mixer part: 155−3261−02 Mixer (E086)?
 Thanks in advance,

Hello Gang, We use Coppercoat… and have done so in the Med for the last 7 years. Bill on BeBe suggests Coppercoat will not work well in water temps exceeding 30C. But thus far, every time I look,

Great and timely information for us. We are about to take our Sharki out for anti fouling. Bill do you know if Sharki’s built in 1980 also featured this propriety osmotic coat? We are hauling out

Eric, I had BeBe hand scraped, then sanded in 2011. The original bottom paint was an International hard paint. There was no barrier coat because it is not needed on your Super Maramu as Amel has a

Dear colleagues Two years ago Heureka got a new standing rigging. But it is only now that I realize that the spreaders have been mounted horizontally during this work. On pre-rig pictures I can see

Hi Ian and Judy, Did he actually use sand or another media? Best Fair Winds Eric

Hi if it is any help I recently pulled off exhaust mixer from the engine and found it 90% blocked with carbon. If much worse probably would not start either. I am not sure of how many hours running to

Hello Eric, It is a Super Maramu 2000. In early 2014, we removed the underseat refrigerators, repaired and thickened the external insulation, replaced the factory centre-box evaporators with new

Hi Gary, Sounds like a good idea. Are any parts, e.g. gasket replacement required for inspection and cleaning? Bob, KAIMI SM 429

Hi Eric, We had the bottom of Pen Azen dry sand blasted with a machine operator who was millimetre accurate. When he finished the gelcoat looked as if it had just come out of the mould. You wouldn't

Hi, I was thinking of having the bottom of Kimberlite stripped and painted. I have been using ablative paint for the last 13 years and the bottom is no longer fair, regardless of a number of heavy

I know this stuff probably belongs in another thread. Let me clarify that a little better.  Boat was listed by owner.  We had already arrived at a preliminary figure, contingent upon inspection, sea

Aware there will be tax, i.e. ad velorum tax. Same situation with a car. In Georgia, buy a car casual sale (no dealer), no sales tax due. Buy from a dealer, must pay sales tax. It has not always

Oops! Sorry when I re-read this, I made it confusing. Both NC and SC have personal property taxes on boats. The sales and use tax is capped at $1500 in NC and is capped at $300 in SC. In SC there

I just had another thought on this. If I remember correctly, youdo not have the full 60 days. Technically the tax is due on the vessel onthe first personal use in the state. So, as a GA resident, the

If it isn't in a too much hurry I can help. But later this spring, right now it is pretty much with the boat... /Annsofie S/Y Lady Annila, SM232, 1998 Skickat från min iPad 11 feb. 2016 kl. 02:41

Eric, Congrats and welcome to the group. Saved $8,400 in sales tax in GA because it is a "casual sale". Sorry to be the bearer of bad news. I think you need to revisit the GA sales and

Hi, Do you have a Super Maramu or a SN? Fair Winds Eric Kimberlite Amel Super Maramu #376

Paul. Sorry to see you've had a problem with the drive. I've worked with Joseph on another Amel he's very good best on St Tom here's his number. 1 (956) 561-0620 Good luck. Fair Winds Smooth