Michael, and all .. I kind of watched this whole thing unfold and it's pretty interesting to me. I don't really feel parochial about Yahoo or the forum site as it's been a great opportunity for me to

I'll send a pic tomorrow of what I have. Thanks On Feb 21, 2016, at 7:39 PM, Alexandre Uster von Baar uster@... [amelyachtowners] <amelyachtowners@...> wrote: Hello Kent, Just arrived

Thanks Elja, but I can't visualize your technique. If you get a chance could you send me a picture? Either post on the site or email it to me directly to karkauai "at" yahoo "dot" com Thanks

Might be a little late to reply as I was sailing from Turks & Caicos to Dominican Republic. But I used Permatex. Sincerely, Alexandre SM2K #289 NIKIMAT Marina Puerto Bahia, Samana, Dominican

My 220v motor on my watermaker does not start up. If I turn the clutch wheel on the high pressure pump in the right direction the motor will actually start but it goes in the wrong direction and

Hello Kent, Just arrived in Samana after 2 rough days single handling... going over the emails. I don't know how, can you send pictures of what you have to compare? I tried to remove the pin (to

Hi Ben, My SM "Life is Good" is 2002 model. I also plan to buy Rocna 40 Kg. I know that the anchor cradle on SM was changed soon after my boat was builed. Does your boat anchor cradle look as on my

Hallo Kent We use a soft shekel in the chain than we have a ring , lead a leash in a loop through and the short end run through the loop at the end everithig is already fixed Elja SM Balu 222

I want to thank Oliver I love to read your statements I learn a lot every time. Elja SM Baloo 222

I want to thank Oliver I love to read your statements I learn a lot every time. Elja SM Baloo 222

For what it is worth, the MAXPROP can also be used to power a shaft alternator. If you stop the engine while in reverse, the prop does not feather, and the shaft will spin. Bill Kinney

Good evening, the Super Maramu was first delivered with the Max-Prop as a standard, and a spare fixed prop (LH 21"x16"), until n° 100 when AMEL decided to fit the AUTOPROP as the standard (and still

Never mind, I found it. How does that knob connect to the pin??? Thanks Kent On Feb 5, 2016, at 10:30 AM, Alexandre Uster von Baar uster@... [amelyachtowners] <amelyachtowners@...> wrote:

Thanks Elja, that's what I was thinking I'd do. Only problem I see is making the connection to the Rocna. Seems like it would be awkward to do. Kent

Hi Elja, It's a long story, but I couldn't get my old Volvo TMD past 2200rpm, spent thousands of dollars on several mechanics, then finally got the AutoProp serial number and was told by Bruntons that

Hi Gerd-Hello Kent almost we make it as Gerd but we take a ca20 mm line inside with lead, ca10m long the rest is 20 m without lead. If we let down the guarddian we put an anchor buoy at the end of

Hi Gerd-Hello Kent almost we make it as Gerd but we take a ca20 mm line inside with lead, ca10m long the rest is 20 m without lead. If we let down the guarddian we put an anchor buoy at the end of

Thank you Kent for the good idea i will try and let's see what happens. Why did you switch the Autoprp against the Maxprop? Greetings Elja SM Baloo # 222