Hello Gang, 1. A member here has found BT propellers made of ALU. Same attachment as original but for the material... you keep the safety of the plastic bolts in the event of contact with unknown

I have Dolphin charger. My next stop is San Juan, Puerto Rico. Most likely AC is 60 Hz in Puerto Rico. I greatly appreciate your help. You provided complete instructions and very fast. Save

Hi Vladimir. On my SM243, there are two shore power cables. The smaller diameter one is for 220V 50A shore power. The larger dia one is for 120V 30A shore power. When using 220 in USA, you will need

Which battery charger do you have? Bill BeBe 387 On Mar 24, 2016 18:44, "Vladimir Sonsev sonsev52@... [amelyachtowners]" <amelyachtowners@...> wrote:

Good evening Vladimir, May be I did not read the question right (sorry has been a long day), but if you have the original Dolphin battery charger, they will charge your batteries regardless if it is

Very soon I will sail my new Amel-Super-Maramu 2000 home to Annapolis from Caribbean. I want to maintain battary charge on my boat using power hookups on my marina. I have a portable transformer and

No personal knowledge here, but I was told by a refrigeration tech that running the Danfos compressors at slower speeds shortened their lifespans because they ran hot longer and the lubricating oil

Y'all never cease to amaze me! How did you figure all this out? Kent SM 243 Kristy On Mar 24, 2016, at 2:06 PM, 'Bill & Judy Rouse' yahoogroups@... [amelyachtowners] <amelyachtowners@...> wrote:

Gerhard, I believe the fan is controlled by the Danfoss compressor module 101N0210. You might try swapping that module. If you do not have a spare and do not want to buy one to test, it is the

Hi Bill & all! I can confirm your experience with the compressor speed. I've been running my fridge in Summer in the 160L setting and in Winter on 130L, as recommended by a knowledgeable fridge

I uploaded at photo at https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1556459704/lightbox/708950431?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/708950431

Thanks, guys.  Sounds about right.  I appreciate all the input.  Now I just want to get on one myself! To: amelyachtowners@... Sent: Thursday, March 24, 2016 7:29 AM Subject: Re:

For what it is worth, we had 1 crew with us on our recent Atlantic crossing. He slept in the bow berth on BeBe SM 387. He was fine with it, but said one night he slept very little and was airborne

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Ken I have sailed her about

looking at the pics on one of the rebuilds there was no hole in the top. On Wednesday, March 23, 2016 9:02 PM, "Kent Robertson karkauai@... [amelyachtowners]" wrote:

I'll be back on Kristy in a week. If no one has it for you by then, I'll get it. On my boat, the knob had a hole in the top where the pin went through and was secured with a nut. I'm not sure how

Thomas, I inspected Lady H in Kemah. I estimated between $150k and 200k in repairs. You can email me at svbebe at gmail dot com Bill BeBe 387

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Jib furler locking pin.PDF Uploaded by

I have been down to see this boat, that is a good idea, I have also made a print that needs input. I will post today. it will be next week before I can get down to Kemah. Thomas s/v ????

Eric, Sorry it took me so long. The prop bearing for my Santorin were made by Metal Craft Engineering, Inc. in Annapolis. You can reach them bymetalcraft11@... or call 410-269-5370. They cost me