|
FW: Super Maramu dimensions
Hello Amel owners. Here are some dimensions we can use regarding the Super Maramu.
Shipping dimensions on a Amel 53 Super Maramu of any year of manufacture are as follows. Boat level and
Hello Amel owners. Here are some dimensions we can use regarding the Super Maramu.
Shipping dimensions on a Amel 53 Super Maramu of any year of manufacture are as follows. Boat level and
|
By
amelforme
·
#26376
·
|
|
Re: [Amel Yacht Owners] Rope cutter info for Stefano
Now received, loud and clear thanks Alexandre.
Stefano
Now received, loud and clear thanks Alexandre.
Stefano
|
By
Stefano Biffi
·
#26375
·
|
|
Re: Enclosure fasteners
Mark:
Now THAT is out of the box!
Ian
Mark:
Now THAT is out of the box!
Ian
|
By
francesringley@...
·
#26374
·
|
|
Re: Enclosure fasteners
Kent:
I have a curtain that zips at the top to the canopy that pulls out from the hard dodger. It also fastens to side windows. It has a zipper door and drops vertically down to the cockpit floor. I
Kent:
I have a curtain that zips at the top to the canopy that pulls out from the hard dodger. It also fastens to side windows. It has a zipper door and drops vertically down to the cockpit floor. I
|
By
francesringley@...
·
#26373
·
|
|
Re: [Amel Yacht Owners] Rope cutter info for Stefano
Good morning Stefano,
I replied to you twice, so looks like my email are going to your spam box.
In order to prevent that add my email addresses to your contacts.
Here is my answer to your
Good morning Stefano,
I replied to you twice, so looks like my email are going to your spam box.
In order to prevent that add my email addresses to your contacts.
Here is my answer to your
|
By
Alexandre Uster von Baar
·
#26372
·
|
|
Re: [Amel Yacht Owners] In Water Hurricane Lay Up
Thanks Kent. As of today, we're booked for June 1. Will check out the travelift and see. If not and should we need it, then Fernandina as you suggest.
Ian
SM153 Loca Lola II
Thanks Kent. As of today, we're booked for June 1. Will check out the travelift and see. If not and should we need it, then Fernandina as you suggest.
Ian
SM153 Loca Lola II
|
By
francesringley@...
·
#26371
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
Kent,
The first cell phone manufacturer that gives the option of turning off the dreaded spell checker will have my business! (Grin) Thanks for letting me know that the hard dodged can be removed.
Kent,
The first cell phone manufacturer that gives the option of turning off the dreaded spell checker will have my business! (Grin) Thanks for letting me know that the hard dodged can be removed.
|
By
James Alton
·
#26370
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
Actually, I Trucked her to Galveston. !*%#! spelling checker.
Kent
Actually, I Trucked her to Galveston. !*%#! spelling checker.
Kent
|
By
karkauai
·
#26369
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
I tricked my SM from Lake Texoma to Galveston TX 8 yrs ago. I'm sorry I don't know the heights, but they used a low-rider truck bed which only had 8-10 inches of clearance from the ground, and
I tricked my SM from Lake Texoma to Galveston TX 8 yrs ago. I'm sorry I don't know the heights, but they used a low-rider truck bed which only had 8-10 inches of clearance from the ground, and
|
By
karkauai
·
#26368
·
|
|
Re: [Amel Yacht Owners] Vibrations Propellor Shaft, engine ?
OK…
In this case, add 2.05 meters to the 65 foot 2 mast height.
You’ll like the SM and if the wallet can stand a big refit, the comfort is better. We bought a “lightly” used (9300 nm under
OK…
In this case, add 2.05 meters to the 65 foot 2 mast height.
You’ll like the SM and if the wallet can stand a big refit, the comfort is better. We bought a “lightly” used (9300 nm under
|
By
Germain Jean-Pierre <jgermain@...>
·
#26367
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
Jean Pierre,
I did a physical measurement of the bridge I would need to clear using a helium balloon and string and the measurement would leave 2-3' of clearance. The moon tide is is only 1/2" at
Jean Pierre,
I did a physical measurement of the bridge I would need to clear using a helium balloon and string and the measurement would leave 2-3' of clearance. The moon tide is is only 1/2" at
|
By
James Alton
·
#26366
·
|
|
Re: [Amel Yacht Owners] Re: Hydraulic Shaft Brake Actuator Overhaul Parts
Gary,
It was a while ago.
However I believe they were just regular O tings. I would go to a hydraulic shop that does cylinders for bulldozers etc. they have the big rings.
If you are in Sint
Gary,
It was a while ago.
However I believe they were just regular O tings. I would go to a hydraulic shop that does cylinders for bulldozers etc. they have the big rings.
If you are in Sint
|
By
eric freedman
·
#26365
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
Hi James,
Mast head height of an SM is 65 feet 2 inches. Add the length of the antennas…
GL with your search.
Jean-Pierre Germain
Eleuthera SM007
Jean-Pierre Germain,
SY Eleuthera, Amel Super
Hi James,
Mast head height of an SM is 65 feet 2 inches. Add the length of the antennas…
GL with your search.
Jean-Pierre Germain
Eleuthera SM007
Jean-Pierre Germain,
SY Eleuthera, Amel Super
|
By
Germain Jean-Pierre <jgermain@...>
·
#26364
·
|
|
Re: [Amel Yacht Owners] Re: Vibrations Propellor Shaft, engine ?
Herbert,
I am looking to buy an Amel but have not yet decided on which model yet. The Super Maramu is very tempting but the size, transportability and mast height all make the 46' models more
Herbert,
I am looking to buy an Amel but have not yet decided on which model yet. The Super Maramu is very tempting but the size, transportability and mast height all make the 46' models more
|
By
James Alton
·
#26363
·
|
|
Re: [Amel Yacht Owners] Enclosure fasteners
Ian,
Our curtain enclosure zipped to the top panel.
Thinking outta the box here: Perhaps you could have some made if you could get access to a 3D printer?
With best regards,
Ian,
Our curtain enclosure zipped to the top panel.
Thinking outta the box here: Perhaps you could have some made if you could get access to a 3D printer?
With best regards,
|
By
Mark Erdos
·
#26362
·
|
|
Re: [Amel Yacht Owners] Enclosure fasteners
Enclosure curtain? Where?
Kent
Enclosure curtain? Where?
Kent
|
By
karkauai
·
#26361
·
|
|
Re: [Amel Yacht Owners] boat preparation for summer in trinidad
I left Kristy on the hard at Peakes in Chagauramas for a summer. I rented an AC unit that mounts on the salon hatch. I had a guy from Dynamite Che k it once a week, flush the Watermaker membranes. I
I left Kristy on the hard at Peakes in Chagauramas for a summer. I rented an AC unit that mounts on the salon hatch. I had a guy from Dynamite Che k it once a week, flush the Watermaker membranes. I
|
By
karkauai
·
#26360
·
|
|
Re: [Amel Yacht Owners] In Water Hurricane Lay Up
There's also a nice Morningstar Marina there, but far enough from town that you'd probably want a car. The price is about the same, but Morningstar has nicer amenities, pool, and a great restaurant.
There's also a nice Morningstar Marina there, but far enough from town that you'd probably want a car. The price is about the same, but Morningstar has nicer amenities, pool, and a great restaurant.
|
By
karkauai
·
#26359
·
|
|
Re: [Amel Yacht Owners] In Water Hurricane Lay Up
Hi Ian.
There is a lift there, but it looked old and not well maintained last time I saw it a couple years ago. There's a better place to haul out at Tiger Point Marina and boatyard a daysail South
Hi Ian.
There is a lift there, but it looked old and not well maintained last time I saw it a couple years ago. There's a better place to haul out at Tiger Point Marina and boatyard a daysail South
|
By
karkauai
·
#26358
·
|
|
Re: [Amel Yacht Owners] Enclosure fasteners
Hold it down. The attach points are on the floor. Plus there are some on the benches and coaming.
I've visited a canvas shop and gone through fastener catalogues. No luck. Guess I'll try Amel.
Thanks
Hold it down. The attach points are on the floor. Plus there are some on the benches and coaming.
I've visited a canvas shop and gone through fastener catalogues. No luck. Guess I'll try Amel.
Thanks
|
By
francesringley@...
·
#26357
·
|