Well, that explains it. Canadians would not have plastic because it is too cold there for plastic. Hahahaha! Have you ever done a Google image search? I have found hard to find parts this way when I

The bimini company I went to is fairly big/reputable here in Toronto area. Yes we looked through their catalogues. Next on the hit parade will be when we get to the States. Would be nice if I could

Did the company have and check a catalog? If not, maybe another company might have a catalog. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +1832-380-4970 USA Voice Mail

Thanks Bill. Yes, I took it to a bimini company and they hadn't seen it either!

Ian, I have never seen that before. It is possible that Amel used this, but I doubt it. Irregardless of whether it is Amel original or not. Take it to someone who makes biminis...they will/should

I posted a photo of the fastener. Has anyone seen these before? Ian Townsend SM153 Loca Lola II

I believe he is looking for the little bungee cords with the toggle that holds the rear weather cloth to the seats and the cockpit sole. Fair Winds Eric Kimberlite Amel Super Maramu #376

Can't help you there Ian. I don't have that. I'd like to see a pic, though. Kent

Hi Joel, thanks for this. Nice to know you keep a fatherly eye on the group and offer your knowledge as needed. Cheers Danny SM 299 Ocean Pearl

Great news Ben. Thanks for getting back to us with what you found. Although you found what I guessed you would find with the O Ring, it helps me improve my guessing and diagnosis skills to know that

Had my Santorin lifted by deck plates. They just moved the hooks up a couple of links on one side to tilt the boat slightly to avoid the triatic. Worked a treat. Yes crane hook needs to be well clear

We had various opinions last year in Peakes. In the end we took all the sails off. Two had the leaches replaced and we had a new Genoa made at Ullman's Sails. Very pleased! Get some cheap grease and

Herbert We have an Echotec2 watermaker. They are based in Trinidad very near Peakes. Worth talking to them. Ours is 80l an hour and is an engine driven pump. The pump will take a second membrane and

Hi David I send a fewphotos of my new anchor Rocna 33 As you will see it does not fall that well in the bow. I'll have to move the roller ± 5 cm forward and put a piece of wood (or ionx) underthe

Hi David I send a fewphotos of my new anchor Rocna 33 As you will see it does not fall that well in the bow. I'll have to move the roller ± 5 cm forward and put a piece of wood (or ionx) underthe

I just want to post this issue was resolved. It turned out the O ring was twisted and did not seal. Initially I did not look closely enough to catch it. I kept re- tightening to no avail. All is

Hi Bill, Much appreciated. I am in Italy in a Marina with skilled mechanics, but no Amel experience. These instuctions are very helpful to communicate. This platform is allmost as valuable as my

HiGerhard As I mentioned this was for a pre-purchase survey so I left the previous owner to arrange the lift out with the normal team that he had used in the past. It was a quick lift out,

Hello Amel owners. Here are some dimensions we can use regarding the Super Maramu. Shipping dimensions on a Amel 53 Super Maramu of any year of manufacture are as follows. Boat level and

Now received, loud and clear thanks Alexandre. Stefano