Ben, As a followup to my original post, I have not yet tackled removal of the 110 volt to 230 volt transformer to see if it can be repaired, nor have I been able to find any blown fuse or tripped

Thanks Pat. If you have extra rail bolts we would be happy to purchase 8. Did you have any concerns about the weight rating of these Vetus mounts? Mike Sent: Tuesday, May 03, 2016 9:14 AM To:

Mike , Jamestown marine has the mounts for $168.00 . If I can do anything to facilitate the delivery of the mounts to you , let me know. I think I bought the bolts from Mc Master -Carr , and had to

Hi Pat, In doing this with the boat in the water I presume one cannot move the c-drive. It would seem the engine needs to be separated from the c-drive (I want to replace the coupler donuts anyway).

Mike, I have been wondering what you determined was the problem. I thought you would find it to be a motor mount. I just replaced mine last fall , with those mounts and it greatly reduced the

Also Renault Panda #348 apparently is also a correct colour Jean-Pierre Eleuthera SM007

Mike, I cannot help you with whether the replacement mounts are correct but I can say that engine mounts do need to be replaced from time to time. It happens sometimes that the mounts are not

After completing our passage of 1500nm including 130 hrs with a knocking in the auxiliary system except at a sweet spot at 1450RPM, we’ve identified the culprit in the starboard aft motor mount.

Dieter, The hardener will have a relatively short shelf life of a year or so but I have used Awlgrip paint that was 10+ years old with no problems, just use a fine strainer to filter out any tiny

Got it. Thanks Bill. Ben Driver La Bella Vita SM #347 On May 2, 2016, at 10:39 AM, 'Bill & Judy Rouse' yahoogroups@... [amelyachtowners] <amelyachtowners@...> wrote:

Ben, Sorry for the confusion...I said Prickly Bay Marina in my first email...I was wrong. It is Spice Island Marine Services Talk to Susie simsco"at"spiceisle.com. Tell her that Bill BeBe referred

Ben, They did when we were there, so yes, I am certain. I will warn you that workers in yards have the habit of disconnecting shore power when they need to plug in a tool, then forgetting to plug it

Does Prickly Bay Marina have the ability to leave boat hooked to shore power on the hard? Ben Driver La Bella Vita SM #347 On May 2, 2016, at 10:18 AM, 'Bill & Judy Rouse' yahoogroups@...

Ben, We have hauled out at Prickly Bay Marina and found them very good. There is a new haulout at Clarke's Court Bay...newer and bigger lift and the same price as Prickly...do not know any more than

I have the same setup transformer in my boat. So far, I have not found a marina in the Caribbean that does not have 220v power so I have not used it. I do have a question on this transformer: when

We are moving our boat out of hurricane box from St Martin to Grenada next month. We will be back in California for three months visiting family so a little uncomfortably leaving boat in the water

After some research with the help of Maude from AMEL and AkzoNobel and many others I found the color which was used for the mast painting of my Sharki (Nirvana mast): The color is AWL GRIP G8479 Amel

Gary, I am certainly no electrician or expert, but I'll share my thoughts... First guess: I am 99% sure that your power may be wired wrong in an attempt by someone to bridge US and EU power. The

Same thing for us. I believe breakers become weaker with frequent tripping. We changed our old AC's to Webasto but also we changed the breaker... No probs since... Jean-Pierre SY Eleuthera SM007