hi James, I do not know the boat you are interested in, but I do know Michel Charpentier. I have bought an Amel Sharki from him last year. He is a good and trustworthy guy. He knows a lot about Amel

James, Yes, 24mm, as I recall, but suggest you simply crank the engine while holding the "stop" button so it won't start. This will be more effective in circulating lube oil than a slow hand turn. If

John, Thanks, that is a big help. James, Sueno, Maramu #220,( hoping to soon be the owner)

We wanted an "as factory" installation so we went with the Xantrex PROsine 1800 on #350, on the advice of Bill who has the same model as a factory installation on #387. Our installation consists of

We fitted a Cotek 3 KW. Bullet proof gear and in combo with solar, avoids genset useage. Other option is Victron... I would avoid Mastervolt. GL Jean-Pierre Germain Eleuthera SM 007

Hi Duane, I believe we have what was the standard fitment in 2004 under the nav tablke rhs cupboard. Mastervolt 24/500....ie 500W...doesn't run much except laptop, phone chargers etc I installed a

An option on the SM was a 24V/230V Inverter. I am interested in what model Amel put on the boats if someone has one...or which one you might have added. Thanks, Duane Wanderer, SM

James, 99% sure it is 24mm. John, Popeye, Maramu #91

Joe, Many thanks for the suggestion, I will get that ordered right away. The manual may not arrive in time for visiting the boat so if anyone else might know the socket size for the bolt on the

GET THEAUSTIN MONTEGO ENGINE MANUAL FROM HAINES IN EBAY OR AMAZON ITS THE SAME ENGINE A PERKINS PRIMA MUCH BETTER DETAIL GOOD PHOTOS ,ALSO JOE

Hello all, Does anyone know the size of a socket required to fit the large bolt/nut on the front of the crankshaft of the Perkins Prima 60? Also, are the glow plugs metric or Imperial? I would

looking to change on our Santorin to a32kg delta does anyone have information on the required Parts for the upgrade of rhe bow roller regards JOE

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Bow Thruster Maintenance/Bow thruster

Hi Alan, New Zealand - we found it very hard to leave. Noa is currently in Lisbon, so a bit far for a little cuddle up of #436 and #437 at the moment. I´ll post some photos later. Cheers, Walter

Hi Walter, Where are you? We are in New Zealand waiting for weather to take us to Fiji. Do you have any photos of this bowthruster drain pipe arrangement that you have and I don't? Cheers Alan Elyse

Hi Allan, #436 and #437 must have met when being built in 2004. Although the first owner of Noa let Amel built a few bits and pieces to his liking, I´m pretty sure the setup of draining the bow

Thanks Danny, I've been all around the back between the stainless plate and the lamp housing and can't find anything that moves. Cheers Alan Elyse SM437

Hi Allan. Try the back. Danny Sm 299 Ocean Pearl On May 8, 2016 1:33 PM, "divanz620@... [amelyachtowners]" <amelyachtowners@...> wrote:

Thanks, but can you give me a bit more detail? I've tried prying from the top, bottom and side with a small screwdriver and can't find anything that moves. Cheers Alan Elyse sm437

Hi Joel, Yes we have the wooden panel with the perspex hinged top to access the pin, not the curtain. I can confirm there is only one pipe and valve and that is for the anchor locker. Also, just