Hi owners, I am changing the forestay but I can't understand how remove the old cable. Is necessary remove the engine and the gearbox ? Where I can find the instruction? Br Antonio SN108

Try going to the B&G website. I recently swapped out our instrument sensors. I was concerned about several compatibility issues. Their tech support is very helpful, I think it's by email, just be very

Bob, 2 years ago a got a brand new paddlewheel sensor from B&G, I used it for 3 months and changed then the complete system to Raymarine. I would sell the "as new" B&G sensor, if you are interested

Bill, thank you for your reply, I'm looking for an identical replacement otherwise it's a slip and replace with a different unit. There seem a plethora of alternatives which all require replacement on

You might try contacting Airmar. http://airmartechnology.com/productinfo.html?category=MT&name=Marine%20Transducers They manufacture almost all of these types of senders and can help you find a

Good morning ladies and gentlemen, my 2 year old B&G paddle wheel unit / sensor failed, its the type that goes through a gate valve. Part number 202-00-064. Going online to order another is met with

Another quality brand you could look at is Hellamarine that are made in New Zealand. I have a boat with them (not my Amel which is still like yours with converted LED globes). They do round

Thanks Valdimir! I am going to try one of those for the light in the cockpit over the companionway. But at 145 lumens, I don’t think it’s going to cut it as a main saloon light.

See Marinebeam Red/White "Switchable" LED for Dome Lights (UN-DOME-15-RWW) $23.00

Bill, The 600 Lumen Alpenglows look really interesting. I would like to see some of these in person sometime. But yes,I agree 80 lumen is completely inadequate. I remembered reading that MB had

Bill, My light board has 12 LEDs. For be it was sufficiently bright. Vladimir SM 345

I just found the manufacturer of LED light bulbs that can be red or whit depending on ON/OFF clicking. MARINEBEAM is the manufacture of those light bulbs. Vladimir Sonsev SM 345 "Life is Good"

I think you are talking about these…. https://store.marinebeam.com/g4-led-bulb-dual-color-red-white-switchable/ Two issues with those. One minor: flipping a switch twice every time I want a white

Bill, I have tested a number of 2 conductor bayonet LED bulbs designed to fit the older style lights and found a lot of them that I didn’t like. I was very impressed however with the Marinebeam

There are LED light balbs that go from red to wight depending on how many times you turn the switch ON/OFF. I have it on my previous boat. I like it. I want to get it for the cabin dome light. I

Hi owners, Does someone know the Red stripes RAL code near the waterline ? Thanks Antonio Inviato da iPhone

Hi Bill, You should pull the trigger and buy the Alpenglow lights. We purchased 6 of the LED white/red fixtures for our boat a couple of years ago. Aft cabin, passage way to aft cabin, over nav

Good evening Gary, now I told you about the rigging tuning process, you should do as if your mast was installed for the first time, and do this process. This means that before, you need to: -remove

On our boat (SM #160) the installed cabin dome lights are single bulb G4 fixtures that have been converted to Dr LED bulbs. There are two big problems from our perspective. First there is NO

Thanks for your responses. Regarding the Rocna 40 kg--I want to report back that for our 2000/Millennium model the Rocna 40 fits perfectly. There is NO metal to metal contact when the throat is