Bill Maffei, There could be several reasons for the propeller rubbing against the tube when bursting to Port, but remember the tolerance is very close, and bursts will cause a lateral force one way or

Yes, 2 outside, 1 inside. Bill BeBe 387

Ian, I am sure that you know that when everything is perfect, the bow thruster sounds differently between Port and Starboard. This is the way that the reversible pitched 3-blade propeller sounds and

I don't own a Santorin, I own a Super Maramu, I assume they are similar. Consequently I strongly suggest 2 on the foot as Amel originally designed it. And 1 inside. if you have not seen it yet, here

Thanks again friends!! I ordered new foam seals. But now, given what read here,I have to put two or three foam seals on bow thruster shaft of my Santorin?

Hi Bill , we also have different noises on our bow thruster . Amel Guadeloupe had done some work on it and then they were concerned about the different noises in case they had reassembled something

Alex, If you look at the drawing you posted you omitted the end piece specifications which is R8.0 thickness 10 for each end, diameter of the hole in the end which is 8.2mm, and length of the end

Hi Andrew , thanks for that info Ian

Good morning Bill, I am not technical at all, but isn’t it the “8 mm hinge on each side” the specification of the ends? I just posted the drawing Bansbach sent me on

Thanks Bill, Very helpful. Kind regards Colin Streeter, Island Peal II, SM#332 -- Colin Streeter 0411 016 445

Hi We put 3 VictronSPP031401200 solar panels on the Emek solar Arc – they have a similar output. Emek could provide these but we got them from a local tradesman who specializes in domestic solar

Hello Ann-Sofie You said 1500 Ah from the windgenerator during 4 month that I gott to 12,5 Ah aday I might got it wrong? Paul on SYKerpa SM 259

Ian the name is Tera Solar TRP 150B 148x68 cm We have 3 of those so fare very happy with them The remaining info you find on the Web Paul SYKERPA SM 259

Whatever it is 12Ah per day is not even worth considering. We have 600W of solar panels and I checked the meter just now, we got 2.21KwH today, which at 24V = 92Ah We have one freezer and one frig

Sorry I don't understand Paul. What gives 12 Ah/day? If you referr to to my previous e-mail about wind gen, my figures was only for the wind gen. With our intotal 600 W slolarpanel and windgen, we

Hi Paul, Can you tell me how many panels you have on your Emek arch and the dimensions of the panels ? If you know the name of the manufacturer and the name of the panel I can get

Thanks Dennis I assume you have a 12 v system given the high Ah. Do you have the 200 W or 400 w WG ? You have no problem of running the mizzen baloner at all? If you want you can send me info about

alex, That description is not complete because you also need the specification of each end where they are connected. I am not sure of the specification, but I am sure that this is a variable

I'm going to order some new toes from Amel, too...just to keep as spares. I'm sure Alex already has a full set or two.

Ill check.. Thanks Ben Driver La Bella Vita CG #1120066 SM #347