Hi No I still do not know the size of the bolts. I heard they are about 8mm. But I did not realize that there were different sizes on the 2 booms. It would be great if you could figure out the size

Hi I recharge the electric outboard indirectly from the solar panels, meaning from the boat's AGM batteries. I have both the 12V charger and the 220V charger. With an inflatable zodiac dinghy, and 2

Hello Alexandre We have an Victron MPPT 150/35 for the 450 w on the Arc and 100/30 for the rail mounted panels The controller there are only one model called MPPT control it's rather new been out less

Hi Stefano Russo is the best in the Med to make your rigging perfect. I liked his proposal. The same price like you and 6 weeks. Unfortunataly I stayed in Turkey and Emek did it for me. My fault; ok;

Barry, I thought 54 #17 was a different Amel 54. I know nothing about your boat. Continue to have fun! CW Bill Rouse, Yacht BeBe hull 387 +1832-380-4970 Global VoiceMail Currently Trinidad

Hi Stefano, You don't mention where in Italy you want to be located, but if Monfalcone works for you I would highly recommend Nautec Mare. Their painting is exceptional - we did not have any done but

Hi I just replied to a parallel conversation, "Amel Solar panels". Details are there, but I installed two Panasonic N330 panels (thats 330W each) in April 2016. Together with a TriStar MPPT 60

Thanks for the info Eamonn, interesting how you can use your solar panel to recharge your Torqueedo electric outboard!!! Sincerely, Alexandre SM2K #289 NIKIMAT Club Nautico de San Juan, Puerto

Hi Solar panels: I did a lot of research, including in this forum to find out how much power is required (about 140Ah a day). So I opted for the most powerful panels with the smallest footprint, that

Good morning Paul, Could you please tell me which model of Victron Mppt regulators and Victron MPPT Control units you have? Sincerely, Alexandre SM2K #289 NIKIMAT Club Nautico de San Juan, Puerto

Barry and Penny! I'm fare from an expert on solar panels But hear is my thought's so fare. We have three 150 w panels in serie on the Arc, they are Turkish origin, and so fare we are very pleased with

Hi Paul, Thanks for this. I think we may have seen you in Vlikho recently, but didn't have time to come over and chat. Next time ! Ian and Judy, Pen Azen, SM 302, Cleopatra. On 1 Jul 2016, at

Hallo everybody, my Lady is ready to be re-rigged, I'm in contact in France with Russo yachting. They offer me the full painting of the masts and bomas done as new: sanding priming and 3 hands

Hi Bill, We are the third owner bought May 2015. First - Peter and Nicole Mills bought Jan 2006 name "Top Gun" Second - Pierre Brenet bought Aug 2007 name "Diablo Citron II" We think we have a

Barry, What was the previous name of your boat? Bill Rouse BeBe Amel 53 #387 Sent from my tablet +1832-380-4970 USA Voice Mail On Jul 2, 2016 7:57 AM, "Barry Connor connor_barry@...

Hi Bill and Steve, Thank's for that I will invest in one of those laser thermometers. The replaced unit did get too hot to touch. This new replacement is now not left on, I did buy the original 24v

All gas solenoids get very hot when they have been on for a while. After a few minutes of being on, you cant touch it. If I remember correctly, it does not matter which way the wires are connected for

Barry, Please allow me to help, somewhat. The electromagnet in the valve will work with the wires reversed. When electromagnetic solenoids are engaged (energized), they will get hot. The cooking

Hi again Eamonn, Did you ever get the correct sizes and threads for the boom track aluminum bolts? If not, I will take them out and try to get correct sizes for you. Kent SM243 Kristy

Hi Eamonn, Wandering around Cleopatra we spotted Travel Bug, looking well ! Are you able to tell me where you had her rerigged ? Did you use ACMO rigging ? Were you happy with the riggers