|
Re: [Amel Yacht Owners] Genoa track plugs
Eric,
What hasn’t been said clearly yet is that there are multiple sizes of these plugs depending on when your boat was made. When ordering you need to specify the exact size you need.
Bill
Eric,
What hasn’t been said clearly yet is that there are multiple sizes of these plugs depending on when your boat was made. When ordering you need to specify the exact size you need.
Bill
|
By
Bill Kinney <greatketch@...>
·
#28068
·
|
|
Re: B&G Sonic Speed
Thanks to all.
As my boat is now in Limassol Cyprus, do you know a good b&g technician there?
Regards,
Ofer Magen
Thanks to all.
As my boat is now in Limassol Cyprus, do you know a good b&g technician there?
Regards,
Ofer Magen
|
By
ofer magen
·
#28067
·
|
|
Re: [Amel Yacht Owners] Genoa track plugs
Bill,
Do they fit without alteration?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Bill,
Do they fit without alteration?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
sailormon <kimberlite@...>
·
#28066
·
|
|
Re: Yanmar 24 volt alternator make/model
Am I missing something here? On my SM (Hull #335) the red lamp in the lower right hand corner of the 24 VDC panel illuminates red when alternator output voltage is less than battery voltage and
Am I missing something here? On my SM (Hull #335) the red lamp in the lower right hand corner of the 24 VDC panel illuminates red when alternator output voltage is less than battery voltage and
|
By
amelliahona <no_reply@...>
·
#28070
·
|
|
Re: [Amel Yacht Owners] Genoa track plugs
Also purchase mine from Maud in La Rochelle.
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
Also purchase mine from Maud in La Rochelle.
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
|
By
Alexandre Uster von Baar
·
#28065
·
|
|
Re: [Amel Yacht Owners] Genoa track plugs
Eric,
I bought 100 recently from Maud in La Rochelle.
Bill
BeBe 387
Trinidad
Eric,
I bought 100 recently from Maud in La Rochelle.
Bill
BeBe 387
Trinidad
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#28064
·
|
|
Re: [Amel Yacht Owners] Genoa track plugs
What size are the ones you have? Maybe they will fit someone else’s track?
Bill Kinney
SM #160, Harmonie
Highlands, NJ
“Ships and men rot in port."
http://fetchinketch.net
What size are the ones you have? Maybe they will fit someone else’s track?
Bill Kinney
SM #160, Harmonie
Highlands, NJ
“Ships and men rot in port."
http://fetchinketch.net
|
By
Bill Kinney <greatketch@...>
·
#28063
·
|
|
Genoa track plugs
I was about to change the plastic plugs that are in the Genoa track. I had a bag of them from Amel and never use them. Yesterday I opened the bag and found that they are to big in diameter,
Does
I was about to change the plastic plugs that are in the Genoa track. I had a bag of them from Amel and never use them. Yesterday I opened the bag and found that they are to big in diameter,
Does
|
By
sailormon <kimberlite@...>
·
#28062
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Thanks Bill.
By
sailormon <kimberlite@...>
·
#28061
·
|
|
Re: [Amel Yacht Owners] Detached Retina
Kent, Sorry to hear abut your injury. As our boats and bodies age , they both require repairs. Boats are just more expensive . Diane and I wish you a speedy and full recovery . May I suggest , that
Kent, Sorry to hear abut your injury. As our boats and bodies age , they both require repairs. Boats are just more expensive . Diane and I wish you a speedy and full recovery . May I suggest , that
|
By
Patrick McAneny
·
#28069
·
|
|
Re: Head sail furling
I looked in the files section and pictures section but did not have any luck... Can anyone provide a description of the parts needed to rebuild the jib furler gearbox. I have had successful experience
I looked in the files section and pictures section but did not have any luck... Can anyone provide a description of the parts needed to rebuild the jib furler gearbox. I have had successful experience
|
By
william_maffei@...
·
#28059
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Eric,
Here is a photo:
https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1897410048/lightbox/1080586047?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/1080586047
We had mistakenly
Eric,
Here is a photo:
https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1897410048/lightbox/1080586047?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/1080586047
We had mistakenly
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#28060
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Sorry that should be TOP LEFT CORNER ....
Cheers
Alan
Sorry that should be TOP LEFT CORNER ....
Cheers
Alan
|
By
Alan Leslie
·
#28058
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Eric,
If you look at the photos that Neils uploaded, the relay is in the top right corner of one of the photos.
Its mounted on the engine just above the alternator and it controls the alarm
Eric,
If you look at the photos that Neils uploaded, the relay is in the top right corner of one of the photos.
Its mounted on the engine just above the alternator and it controls the alarm
|
By
Alan Leslie
·
#28057
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Bill,
To what relay is this thread referring ?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Bill,
To what relay is this thread referring ?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
sailormon <kimberlite@...>
·
#28056
·
|
|
Detached Retina
Masha Danki for your well wishes, and to Derick for your kind offer. Kristy is at the Curaçao Yacht Club and will be in good hands when I fly home in a couple weeks to see my eye doc and visit the
Masha Danki for your well wishes, and to Derick for your kind offer. Kristy is at the Curaçao Yacht Club and will be in good hands when I fly home in a couple weeks to see my eye doc and visit the
|
By
karkauai
·
#28055
·
|
|
Re: Head sail furling
Did all of the screws shear? I once had this problem. It was caused by two of the screws working out. The last one (or two) then sheared off. I used lots of lock-tight when I replaced the screws
Did all of the screws shear? I once had this problem. It was caused by two of the screws working out. The last one (or two) then sheared off. I used lots of lock-tight when I replaced the screws
|
By
Miles
·
#28054
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
Ben,
Yes about 50...that is the standard SM alternator. The option was for a 175 amp.
Bill
BeBe 387
Ben,
Yes about 50...that is the standard SM alternator. The option was for a 175 amp.
Bill
BeBe 387
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#28053
·
|
|
Re: [Amel Yacht Owners] Yanmar 24 volt alternator make/model
I'm not sure of my capacity but much less than 174 Amp. I'm guessing maybe 50
Ben Driver
La Bella Vita
SM #347
I'm not sure of my capacity but much less than 174 Amp. I'm guessing maybe 50
Ben Driver
La Bella Vita
SM #347
|
By
Ben and Gayle Super Maramu #347
·
#28052
·
|
|
Re: [Amel Yacht Owners] Head sail furling
Bill based on your discretion the worm gear bearing/ bushing is worn allowing it to run free. Normally it's a self locking system.
Regards
Capt Richard Piller
Bill based on your discretion the worm gear bearing/ bushing is worn allowing it to run free. Normally it's a self locking system.
Regards
Capt Richard Piller
|
By
Richard Piller <richard03801@...>
·
#28051
·
|