Alexandre, That is exactly my setup. The cooler is the part where the white hose comes in and the black hose leaves. The complete cooler with gasket and bolts was US$300 from Foley Engines,

Hello Bill, That is what I was just writing to Eric. I feel I have the same set-up as you. Mine says: ZF Hurth HBW 250 If you can please have a

Alexandre, ZF and Hurth transmissions are identical, but I should be clear which one I have. My engine is the Volvo TMD22, the transmission is a Hurth 250, later in production known as a ZF 25M.

Hello again Eric, Thanks for the information and the part number. So the 90 mm vs 60 mm will fit as well and as easily? Pictures are always nice/easier for me! Thanks again,

On the electrical drawings from Amel, it shows the sump pump coming from the battery side of the switch. That's how Kristy was wired when I got her. I have also moved the charger DC output cables to

Good morning Francisco, Thanks for the email. Will email them Monday! I was looking at your web site yesterday, great trip !! Alexandre --------------------------------------------

I only have a small one of the C Drive... attached here, let me know if you receive it. Sincerely, Alexandre --------------------------------------------

Hello again Eric, I remember you telling me the story in Florida… There is a little drain hose at the bottom of the rope storage under the mizzen mast. You could add more and/or also add the same

Good morning Eric, Thanks for the reply, I just look at the owner manual and yes it says: ZF Hurth HBW 250 So where can I get the cooler part? So regarding the hoses, I just need to go to a

Good morning Eric, In my opinion the later setup is better: With the Air intake on the port cockpit seat like you and I have, every time we are opening the storage, we are blocking the air

I agree Kent , keeping my boat on a mooring I want the sump to be working, but would like to disconnect the rest of the boat. I am reluctant to change things electrically , but am wondering if there

When I visited Amel in La Rochelle there was a cutaway sample of the sail drive , and the inside of the rudder in the lobby of the main office. I can not find the photos of this. Does anyone have

Thanks for the great information !!! Does any one know if this is the same issue on the ZF Transmission? Also does any one know a supplier to get a spare hose for the

Eric, We cut off the original Amel ducting inside the cockpit locker and replaced it with Eberspächer-brand silencer (where it fit) and with heater-rated marine ducting (where Espar silencers are

Hi all, I have a friend who is interested in a 1978 Maramu for sail in Marmaris Turkey. Amel Maramu for sale Turkey, Amel boats for sale, Amel used boat sales, Amel Sailing Yachts For Sale Classic