Nameless, Since you asked , how to rebuild , I assume you would like to do this yourself , otherwise you could let a fabricator determine how to. If you had access to a similar boat on the hard , then

My SN 24 1990. Maybe this helps. Bali Hai Annapolis

Bill, Could you share some of your knowledge and experience with the Amel bow thruster? For instance, what techniques do you find work best when backing using the thruster? Also what procedures

santorinlo18@... If I were you, I would go to a boatyard that not only has another Santorin (I assume you have a Santorin), but also a contractor capable of fabricating a replacement, or repairing

I just switched ours out to the heavier weight per Amel Martinique's recommendation. I don't really like having to carry the extra oil of different weights aboard (having spare oil is important to me

Hi forum, Unfortunately in the last summer when sailed out of a congested harbour in Greece, my bow thruster housing, (the bottom part which is is used as cover aligned with the hull when bow thruster

On Peregrinus, the anchorwash is effective on sand and light mud. The pump is a reliable old, rusty Shurflo that does its job. For heavy mud, this is insufficient, and our solution is to quickly run

Perfect Bill, thank you. Duane

Here is a photo of what Amel Martinique used on a Super Maramu C Drive. ​

Duane, If you went to Amel in Martinique and had them do the job, they would use 80-90 weight gear oil. Does this answer your question? Bill BeBe 387

What type of oil are you using in the C-Drive? The instructions in the "files" section calls for 15/20W40, but there is a note that the newer Amels use 80-90 weight gear oil. I'm assuming that

Hello gang, We took a different route; we simply connected the chain wash to the “fresh water system” and removed the “headache” pump altogether. Effectively, the jet is not very powerful

Miles, I have to agree with Ian. I found the wash down ineffective , particularly in muddy conditions. Being in the Chesapeake our chain is always muddy.I used the original pump , in the port locker I

Hi Miles, We had a number of problems with our original anchor pump--it was replaced by Amel 3 times. That apart, we didn't find the direction and volume of the water onto the

I am in the process of rebuilding the bow on my 1998 SuperMaramu after something ran into my boat on its mooring, and I am in need ofhelp. I am reconstructing the anchor chain wash and I need to

Hello Pat, I can totally relate to all the time you spent moving the boat, plus determining what was damaged… Yes hopefully this is the only claim for both of us !!! Hope we meet

Alexandre, I feel for you,, and even though I did not have to argue with my insurance co. over coverage , the process was very time consuming. I have probably invested 50 or more hours pouring over

We have the 15hp Yamaha 2 stroke, and find it to be the perfect engine. It has enough power to plane 2 men and 2 women with our 9.5 AB Aluminum rib. Any less hp would not suit our needs well. The last

Good afternoon Alex, Same as Jean Pierre, 15HP Yamaha Enduro. 2 Stroke purchased by the previous owner in 2010 in St Martin for 1844 Euro. I wouldn’t choose anything bigger, as it perfectly fit in

Hello Pat, I am honestly sick to think about it. I could go in detail and mention all the work “my” insurance ask me to do (like proving how much I am spending on marina since I own the boat,