Hi Porter, and others, If there is an AMEL-savvy surveyor going to be in the SE Caribbean in February, then we would be interested to share/contribute to costs. We anticipate the need for a few weeks

Well, OK then. I guess that ends that discusssion.

Hi All, I second the advice to avoid going too much oversize. Moonshot-now-Perigee was re-rigged prior to our purchase with oversize sheets for the Headsail/Genoa and, whilst this gives confidence

Hi James and Chloe, Where are you located? Kimberlite is at Simpson bay marina. We should be on the boat after 3 Pm tomorrow. Please text me at 1- 631-398-9990. Fair Winds Eric Kimberlite Amel

Its possible there are 2 types of injectors for the same engine, one set for derated. The difference would be seen in the nozzle hole Dia. Have you still got the old injectors!. Visual examination

Thanks Mike. Duane Wanderer SM477

Hi, We arrived in St. Martin yesterday and will be here until the 17th-18th. We'd love to meet more Armelians! Cheers, James & Chloé. SeaBean SM#344

Hi, I will be on Kimberlite in St Maarten starting Thursday for a week. Would anyone like to join us for a drink? Fair Winds Eric Kimberlite Amel Super Maramu #376

Dom, The autoprop rebuild is not difficult just tedious and takes the good part of a day. If you Contact AB the bruton distributor in the USA they will sell you the bearings needed and rent you the

Duane, I cannot speak to your hull rubrail details, only our SM#240. They may have changed, which is why it is so important to always include hull #’s in these postings. As you saw in the

Hi Jeff and Duane, My wife and I are nearby in Boynton Beach and we would love to get together. Mark and Laura Pitt Sabbatical III, SM #419, boat in Carloforte, Italy

Thursday is fine. Give me a call on my cell 5169830094 and we'll coordinate plans Sent from my Sprint Samsung Galaxy S7.

Patrick,.something shoved the motor out of line, or perhaps you were rolling side to side, or maybe something jammed in the bow thruster "hull section". At any case, all you need to do is prop up the

I simply do not know to tell you this but after using the thruster in anger today, I thought it had risen into it's up position, however when I came to use it again I found that the cable at the top

BeBe, SM2k, #387 came with 18mm, but the specs say 16mm. A few years ago I bought 3/4" which is about 20mm. This was New England Rope Sta-Set. It is soft and pliable and very strong. The larger size

Hi Mike, That drawing is interesting. It appears not to distinguish between the hull below the rubrail, and the rubrail. But the rubrail isn't fiberglass, at least I think it's not based on the

Hi Jeff, We're anchored between the Flagler and Royal Park Bridges, we'd love to get together with you! How about Thursday? You can reach us at 314-280-3757 Duane & Peg Siegfried Wanderer, SM #477

Hi Jeff, Darn, I was just visiting friends in Boynton Beach. I'm not on the boat right now, and don't know the answer to your questions off the top of my head. I bought my furling and outhaul motors

I need to replace the mainsail furling motor, and was wondering if anyone knew the best place to find it in the states (I'm currently in West Palm Beach FL, heading back to LINY Sunday), or do I have