|
Re: [Amel Yacht Owners] Introduction from Utah
Hi All,
Thanks for taking the time to respond in detail it helps tremendously! Two quick questions. I have read of Monsieur Amel's vision regarding his design and light handed sailing. Have you ever
Hi All,
Thanks for taking the time to respond in detail it helps tremendously! Two quick questions. I have read of Monsieur Amel's vision regarding his design and light handed sailing. Have you ever
|
By
Chuck_Kim_Joy
·
#31096
·
|
|
Re: [Amel Yacht Owners] Top Ten for why the electric motor won't work?
That's a start solenoid on my 24v60 (not duo). Try tapping on it with a wrench. It may start. I replaced mine with a new one I got online. I don't remember where but as I remember it was easy to
That's a start solenoid on my 24v60 (not duo). Try tapping on it with a wrench. It may start. I replaced mine with a new one I got online. I don't remember where but as I remember it was easy to
|
By
Kent Robertson
·
#31095
·
|
|
Top Ten for why the electric motor won't work?
After replacing the sprague bearings on the Cat Pump for our Duo 60 Dessalator, now the 24 volt motor won't run (it's always something isn't it?). I'm going to take off all the connections and shine
After replacing the sprague bearings on the Cat Pump for our Duo 60 Dessalator, now the 24 volt motor won't run (it's always something isn't it?). I'm going to take off all the connections and shine
|
By
sailor63109@...
·
#31094
·
|
|
Re: [Amel Yacht Owners] Re: Yanmar 75HP - Cannot go over 2300 RPM
I believe that a repitch is nearly impossible. the AutoProp automatically pitches based on the rpm and the hydronamics of the shape of the blade. So a repitch of the AutoProp I believe requires
I believe that a repitch is nearly impossible. the AutoProp automatically pitches based on the rpm and the hydronamics of the shape of the blade. So a repitch of the AutoProp I believe requires
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#31093
·
|
|
Re: [Amel Yacht Owners] Asking for information SM 246
Hola Rafael,
A good source for information about Amels is Joel Potter in Fort Lauderdale, Florida. Formerly, he was North American sales and service agent for Amel. And he is still actively
Hola Rafael,
A good source for information about Amels is Joel Potter in Fort Lauderdale, Florida. Formerly, he was North American sales and service agent for Amel. And he is still actively
|
By
Ben and Gayle Super Maramu #347
·
#31092
·
|
|
TIP: Grease your autoprop asap after haul-out.
Greetings all,
An interesting tip from the BRUNTON / Autoprop crew at the London Boat Show earlier this week, regarding idiosyncrasies of the autoprop.
Is that, whenever you haul-out for period of
Greetings all,
An interesting tip from the BRUNTON / Autoprop crew at the London Boat Show earlier this week, regarding idiosyncrasies of the autoprop.
Is that, whenever you haul-out for period of
|
By
dbv_au@...
·
#31091
·
|
|
Re: Yanmar 75HP - Cannot go over 2300 RPM (Grease the prop asap after Haul-out)
Greetings all,
An interesting tip from the BRUNTON / Autoprop crew at the London Boat Show earlier this week, regarding idiosyncrasies of the autoprop.
Is that, whenever you haul-out for period of
Greetings all,
An interesting tip from the BRUNTON / Autoprop crew at the London Boat Show earlier this week, regarding idiosyncrasies of the autoprop.
Is that, whenever you haul-out for period of
|
By
dbv_au@...
·
#31090
·
|
|
Re: [Amel Yacht Owners] Re: Yanmar 75HP - Cannot go over 2300 RPM
Bill, your advice on replacing a Vetus coupling on a 55 would be appreciated, Amel recommends sliding the engine forward 15 cm to fit it, it appears to me I can drill and tap the steel spacer to use
Bill, your advice on replacing a Vetus coupling on a 55 would be appreciated, Amel recommends sliding the engine forward 15 cm to fit it, it appears to me I can drill and tap the steel spacer to use
|
By
Bob Grey
·
#31088
·
|
|
Asking for information SM 246
Hi all. I am not really Amel Owner but I want to be one.
I am looking for my Amel SM
In St Maarten recently I saw Agapanthe. SM 246.
I appreciate if somebody has some information about this boat.
Hi all. I am not really Amel Owner but I want to be one.
I am looking for my Amel SM
In St Maarten recently I saw Agapanthe. SM 246.
I appreciate if somebody has some information about this boat.
|
By
rcavie <no_reply@...>
·
#31089
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Hi Craig! Hope you and Katherine are well. Where y'at?
Kent
Hi Craig! Hope you and Katherine are well. Where y'at?
Kent
|
By
Kent Robertson
·
#31087
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Hey Kent,
Thanks for the kind words. I do hope that by now you've got all those items on "Craig's List" fixed up!!! Kidding aside and having been aboard Kristy several years after that initial sail,
Hey Kent,
Thanks for the kind words. I do hope that by now you've got all those items on "Craig's List" fixed up!!! Kidding aside and having been aboard Kristy several years after that initial sail,
|
By
Craig Briggs
·
#31086
·
|
|
Re: [Amel Yacht Owners] Re: Yanmar 75HP - Cannot go over 2300 RPM
Hi Vladimir
The serial # of the autoprop on Island Pearl II is AP 3713
Cheers
Colin
Hi Vladimir
The serial # of the autoprop on Island Pearl II is AP 3713
Cheers
Colin
|
By
Colin - ex SV Island Pearl
·
#31085
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Kent,
I agree wholeheartedly, exceptfor one thing: we love the dishwasher. We run our dinner dishes in the eveningwith the end of the day battery charge and make hot water for showers. It is
Kent,
I agree wholeheartedly, exceptfor one thing: we love the dishwasher. We run our dinner dishes in the eveningwith the end of the day battery charge and make hot water for showers. It is
|
By
Mark Erdos
·
#31084
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
I had a broker and the seller had a broker, neither of which know a thing about Amels. The owner wasn't involved in the sale, nor did he spend any time with me explaining things. Big mistake. If I
I had a broker and the seller had a broker, neither of which know a thing about Amels. The owner wasn't involved in the sale, nor did he spend any time with me explaining things. Big mistake. If I
|
By
Kent Robertson
·
#31083
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Joel Potter is the best Amel source in the US
Cheers
Sent from my Verizon, Samsung Galaxy smartphone
Joel Potter is the best Amel source in the US
Cheers
Sent from my Verizon, Samsung Galaxy smartphone
|
By
Courtney Gorman
·
#31082
·
|
|
Re: [Amel Yacht Owners] Re: Yanmar 75HP - Cannot go over 2300 RPM
Colin,
If it is not difficult for you,
could you give me your prop number. Yes we have the same engine and transmission but our props could be different.
Vladimir
202 258 1916
On Jan 12, 2017 09:05,
Colin,
If it is not difficult for you,
could you give me your prop number. Yes we have the same engine and transmission but our props could be different.
Vladimir
202 258 1916
On Jan 12, 2017 09:05,
|
By
VLADIMIR SONSEV
·
#31081
·
|
|
Re: [Amel Yacht Owners] Re: low rpm, AutoProp re pitching, AutoProp fro Sale
Kent,
Thanks a lot for your offer. I am in Annapolis MD. I plan to sail to Caribbean in November 2017.
Vladimir
202 258 1916
Kent,
Thanks a lot for your offer. I am in Annapolis MD. I plan to sail to Caribbean in November 2017.
Vladimir
202 258 1916
|
By
VLADIMIR SONSEV
·
#31080
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
If another boat has the amenities present on Amels, there will be the same kinds of problems, Chuck. If an autopilot or reefer or AC fails, you're going to have to go thru the same troubleshooting,
If another boat has the amenities present on Amels, there will be the same kinds of problems, Chuck. If an autopilot or reefer or AC fails, you're going to have to go thru the same troubleshooting,
|
By
Kent Robertson
·
#31079
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Thank you for the warm welcome Kent,
I have been lurking for quite some time and have enjoyed the interactions (from afar). I have also followed a few blogs from members here. I guess the first
Thank you for the warm welcome Kent,
I have been lurking for quite some time and have enjoyed the interactions (from afar). I have also followed a few blogs from members here. I guess the first
|
By
Chuck_Kim_Joy
·
#31078
·
|
|
Re: [Amel Yacht Owners] Introduction from Utah
Welcome aboard Chuck and Kim!
You will find this forum a great resource for all the inevitable questions before and after you purchase your dream boat. If you haven't already, take some time and
Welcome aboard Chuck and Kim!
You will find this forum a great resource for all the inevitable questions before and after you purchase your dream boat. If you haven't already, take some time and
|
By
Kent Robertson
·
#31076
·
|