Greetings all, An interesting tip from the BRUNTON / Autoprop crew at the London Boat Show earlier this week, regarding idiosyncrasies of the autoprop. Is that, whenever you haul-out for period of

Bill, your advice on replacing a Vetus coupling on a 55 would be appreciated, Amel recommends sliding the engine forward 15 cm to fit it, it appears to me I can drill and tap the steel spacer to use

Hi all. I am not really Amel Owner but I want to be one. I am looking for my Amel SM In St Maarten recently I saw Agapanthe. SM 246. I appreciate if somebody has some information about this boat.

Hi Craig! Hope you and Katherine are well. Where y'at? Kent

Hey Kent, Thanks for the kind words. I do hope that by now you've got all those items on "Craig's List" fixed up!!! Kidding aside and having been aboard Kristy several years after that initial sail,

Hi Vladimir The serial # of the autoprop on Island Pearl II is AP 3713 Cheers Colin

Kent, I agree wholeheartedly, exceptfor one thing: we love the dishwasher. We run our dinner dishes in the eveningwith the end of the day battery charge and make hot water for showers. It is

I had a broker and the seller had a broker, neither of which know a thing about Amels. The owner wasn't involved in the sale, nor did he spend any time with me explaining things. Big mistake. If I

Joel Potter is the best Amel source in the US Cheers Sent from my Verizon, Samsung Galaxy smartphone

Colin, If it is not difficult for you, could you give me your prop number. Yes we have the same engine and transmission but our props could be different. Vladimir 202 258 1916 On Jan 12, 2017 09:05,

Kent, Thanks a lot for your offer. I am in Annapolis MD. I plan to sail to Caribbean in November 2017. Vladimir 202 258 1916

If another boat has the amenities present on Amels, there will be the same kinds of problems, Chuck. If an autopilot or reefer or AC fails, you're going to have to go thru the same troubleshooting,

Thank you for the warm welcome Kent, I have been lurking for quite some time and have enjoyed the interactions (from afar). I have also followed a few blogs from members here. I guess the first

Welcome aboard Chuck and Kim! You will find this forum a great resource for all the inevitable questions before and after you purchase your dream boat. If you haven't already, take some time and

Greetings All and Happy New Year, I am new to the group and not yet an Amel owner. My wife and I love the Amels and hopefully will own one this year. I believe I have paid my dues as a husband,

Jeff, I cannot seem to reach you on the phone. Call me at 561-742-9466 or email Mark_Pitt at brown.edu. Mark On 1/11/2017 9:52 AM, JEFFREY KRAUS jmkraus@...

Hi Vlad, When I checked on having my Autoprop repitched, I was told that mine had been replaced with a different model and couldn't be repitched. As I remember, at that time they weren't actually

Hi Vladimir Since Island Pearl II is the same 75hp Yanmar engine, same gearbox, and the original Amel supplied autoprop, and it easily does 3300 - 3500 when clean, I think you will find it is the

As I stated above in this thread, I also have low engine RPM. It was 2500 RPM maximum when I bought my boat. I have 75 HP YANMAR with transmission 2.8:1 ratio. I contacted US Autoprop representative.

I didn't see a number to contact you. Please give me a call on my son's phone 6312768441 and we'll plan for later. I look forward to meeting you folks, along with Duane and Peg, who I will call this